Can an RTO still enrol new students in UEE41010?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 16 March 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in UEE41010?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEE41010 Certificate IV in Energy Management and Control

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEE41010Superseded — equivalentCertificate IV in Energy Management and Control
equivalent
UEE42811Superseded — equivalentCertificate IV in Air-conditioning Systems Energy Management and Control
equivalent
UEE42820Superseded — equivalentCertificate IV in Air-conditioning Systems Energy Management and Control
equivalent
UEE42825CurrentCertificate IV in Air-conditioning Systems Energy Management and Control

training.gov.au publishes 2 replacements for UEE41010. This rail follows UEE42811; the other: UEE41011. The transition clock above is computed from UEE41011, the replacement with the latest inclusion date — the reading most favourable to the provider.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEE41007UEE41010equivalent28 July 2011
The register records this supersession but attaches no note on what changed.
UEE41010UEE41011equivalent30 July 2011
The register records this supersession but attaches no note on what changed.
UEE41010UEE42811equivalent30 July 2011
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEE41010 and for its training package UEE07 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

UEE41010_R1.docxUEE41010 release 1 · product document · published 26 November 2024
UEE41010_R1.pdfUEE41010 release 1 · product document · published 20 July 2012

Is UEE41010 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE41010 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE41010 is made of

training.gov.au lists 29 units for UEE41010. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 29 listed

Code	Unit	Core or elective	In this product
UEENEEC001B	Maintain documentation	`N/A`	not current
UEENEEC002B	Source and purchase material/parts for installation or service jobs	`N/A`	not current
UEENEEC003B	Provide quotations for installation or service jobs	`N/A`	not current
UEENEEC010B	Deliver a service to customers	`N/A`	not current
UEENEED001B	Use basic computer applications relevant to a workplace	`N/A`	not current
UEENEEE001B	Apply OHS practices in the workplace	`N/A`	not current
UEENEEE002B	Dismantle, assemble and fabricate electrotechnology components	`N/A`	not current
UEENEEE003B	Solve problems in extra-low voltage single path circuits	`N/A`	not current
UEENEEE004B	Solve problems in multiple path d.c. circuits	`N/A`	not current
UEENEEE005B	Fix and secure equipment	`N/A`	not current
UEENEEE007B	Use drawings, diagrams, schedules and manuals	`N/A`	not current
UEENEEE008B	Lay wiring/cabling and terminate accessories for extra-low voltage circuits	`N/A`	not current
UEENEEE009B	Comply with scheduled and preventative maintenance program processes	`N/A`	not current
UEENEEE017B	Implement and monitor OHS policies and procedures	`N/A`	not current
UEENEEE020B	Provide basic instruction in the use of electrotechnology apparatus	`N/A`	not current
UEENEEE024C	Compile and produce an electrotechnology report	`N/A`	not current
UEENEEE033B	Document occupational hazards and risks in electrical work	`N/A`	not current
UEENEEE038B	Participate in development and follow a personal competency development plan	`N/A`	not current
UEENEEG001B	Solve problems in electromagnetic circuits	`N/A`	not current
UEENEEG002B	Solve problems in single and three phase low voltage circuits	`N/A`	not current
UEENEEG003B	Install wiring and accessories for low voltage circuits	`N/A`	not current
UEENEEG004B	Install low voltage electrical apparatus and associated equipment	`N/A`	not current
UEENEEG005B	Verify compliance and functionality of general electrical installations	`N/A`	not current
UEENEEG007B	Select and arrange equipment for general electrical installations	`N/A`	not current
UEENEEG008B	Find and repair faults in electrical apparatus and circuits	`N/A`	not current
UEENEEG009B	Develop and connect control circuits	`N/A`	not current
UEENEEK042A	Participate in environmentally sustainable work practices	`N/A`	not current
UEENEEK045A	Implement and monitor, policies procedures for environmentally sustainable electrotech work practice	`N/A`	not current
UEENEEK051A	Develop effective strategies for energy reduction in buildings	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEE41010 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.