UEENEEG005B Verify compliance and functionality of general electrical installations

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEENEEG005B ended on 29 July 2011 — 15 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 29 July 2012. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
UEE07 — Electrotechnology Training Package
Currency period ends
29 July 2011
Latest release
Release 1 · 29 July 2011
Supersedes
UEENEEG005A
Superseded by
UEENEEG105A equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEENEEG005BSuperseded — equivalentVerify compliance and functionality of general electrical installations
  2. equivalent
  3. UEENEEG105ASuperseded — not equivalentVerify compliance and functionality of low voltage general electrical installations
  4. not equivalent
  5. UEEEL0039CurrentDesign, install and verify compliance and functionality of general electrical installations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

Official documents on the register

What training.gov.au lists for UEENEEG005B and for its training package UEE07 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is UEENEEG005B on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEENEEG005B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where UEENEEG005B is used

training.gov.au lists UEENEEG005B inside 24 training products, none of them current. Every one of them is below, with the register's own core or elective flag for UEENEEG005B in that product.

Products no longer current 24 listed

The register still records UEENEEG005B inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeUEENEEG005B is
UEE30807Certificate III in Electrotechnology ElectricianQualificationelective
UEE31710Certificate III in Hazardous areas - ElectricianQualificationelective
UEE40210Certificate IV in Electrical - Data and Voice CommunicationsQualificationelective
UEE40310Certificate IV in Electrical Installation Inspection and AuditsQualificationelective
UEE40410Certificate IV in Electrical - InstrumentationQualificationelective
UEE40510Certificate IV in Electrical - Air-conditioning SystemsQualificationelective
UEE40610Certificate IV in Electrotechnology - Systems ElectricianQualificationelective
UEE40810Certificate IV in Electrical - Fire Protection Control SystemsQualificationelective
UEE40910Certificate IV in Industrial Electronics and ControlQualificationelective
UEE41010Certificate IV in Energy Management and ControlQualificationelective
Show the remaining 14 products no longer current
CodeTraining productTypeUEENEEG005B is
UEE41110Certificate IV in Electrical - Lift SystemsQualificationelective
UEE41210Certificate IV in Electrical - Rail SignallingQualificationelective
UEE41910Certificate IV in Electrical - Renewable EnergyQualificationelective
UEE42010Certificate IV in Electrical - Photovoltaic SystemsQualificationelective
UEE42110Certificate IV in Electrotechnology - Electrical ContractingQualificationelective
UEE42610Certificate IV in Hazardous areas - ElectricalQualificationelective
UEE50210Diploma of Electrical and InstrumentationQualificationelective
UEE50310Diploma of Electrical and Refrigeration and Air-conditioningQualificationelective
UEE50410Diploma of Electrical EngineeringQualificationelective
UEE50710Diploma of Renewable Energy EngineeringQualificationelective
UEE50910Diploma of Industrial Electronics and Control EngineeringQualificationelective
UEE60610Advanced Diploma of Industrial Electronics and Control EngineeringQualificationelective
UEE60910Advanced Diploma of Renewable Energy EngineeringQualificationelective
UEE61210Advanced Diploma of Engineering Explosion protectionQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEENEEG005B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.