UEE40610 Certificate IV in Electrotechnology - Systems Electrician

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEE40610 ended on 14 March 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 16 March 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEE07 — Electrotechnology Training Package
Currency period ends
14 March 2012
Latest release
Release 1 · 29 July 2011
Supersedes
UEE40607
Superseded by
UEE40611 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEE40610Superseded — equivalentCertificate IV in Electrotechnology - Systems Electrician
  2. equivalent
  3. UEE40611Superseded — not equivalentCertificate IV in Electrotechnology - Systems Electrician
  4. not equivalent
  5. UEE40620CurrentCertificate IV in Electrotechnology - Systems Electrician

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE40607UEE40610equivalent28 July 2011

    The register records this supersession but attaches no note on what changed.

  • UEE40610UEE40611equivalent15 March 2012

    The register records this supersession but attaches no note on what changed.

Is UEE40610 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE40610 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE40610 is made of

training.gov.au lists 28 units for UEE40610. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 28 listed

CodeUnitCore or electiveIn this product
UEENEEC001BMaintain documentationN/Anot current
UEENEEC002BSource and purchase material/parts for installation or service jobsN/Anot current
UEENEEC003BProvide quotations for installation or service jobsN/Anot current
UEENEEC010BDeliver a service to customersN/Anot current
UEENEED001BUse basic computer applications relevant to a workplaceN/Anot current
UEENEEE001BApply OHS practices in the workplaceN/Anot current
UEENEEE002BDismantle, assemble and fabricate electrotechnology componentsN/Anot current
UEENEEE003BSolve problems in extra-low voltage single path circuitsN/Anot current
UEENEEE004BSolve problems in multiple path d.c. circuitsN/Anot current
UEENEEE005BFix and secure equipmentN/Anot current
UEENEEE007BUse drawings, diagrams, schedules and manualsN/Anot current
UEENEEE008BLay wiring/cabling and terminate accessories for extra-low voltage circuitsN/Anot current
UEENEEE009BComply with scheduled and preventative maintenance program processesN/Anot current
UEENEEE017BImplement and monitor OHS policies and proceduresN/Anot current
UEENEEE020BProvide basic instruction in the use of electrotechnology apparatusN/Anot current
UEENEEE024CCompile and produce an electrotechnology reportN/Anot current
UEENEEE033BDocument occupational hazards and risks in electrical workN/Anot current
UEENEEE038BParticipate in development and follow a personal competency development planN/Anot current
UEENEEG001BSolve problems in electromagnetic circuitsN/Anot current
UEENEEG002BSolve problems in single and three phase low voltage circuitsN/Anot current
UEENEEG003BInstall wiring and accessories for low voltage circuitsN/Anot current
UEENEEG004BInstall low voltage electrical apparatus and associated equipmentN/Anot current
UEENEEG005BVerify compliance and functionality of general electrical installationsN/Anot current
UEENEEG007BSelect and arrange equipment for general electrical installationsN/Anot current
UEENEEG008BFind and repair faults in electrical apparatus and circuitsN/Anot current
UEENEEG009BDevelop and connect control circuitsN/Anot current
UEENEEK042AParticipate in environmentally sustainable work practicesN/Anot current
UEENEEK045AImplement and monitor, policies procedures for environmentally sustainable electrotech work practiceN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE40610 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.