UEE40620 Certificate IV in Electrotechnology - Systems Electrician

Currenttraining.gov.au: current

Australia's national training register lists UEE40620 as current. It publishes no end date for the currency period.

Product type
Qualification
Training package
UEE — Electrotechnology Training Package
Currency period ends
no end date published
Latest release
Release 6 · 8 February 2023 · 6 releases in all
Supersedes
UEE40611
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au points at nothing after UEE40620: it is the current product, and no replacement is listed.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE40611UEE40620not equivalent4 October 2020

    The register records this supersession but attaches no note on what changed.

Is UEE40620 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE40620 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE40620 is made of

training.gov.au lists 122 units for UEE40620: 4 core and 118 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 4 listed

CodeUnitIn this product
UEECD0010Compile and produce an energy sector detailed reportcurrent
UEECD0024Implement and monitor energy sector WHS policies and procedurescurrent
UEECD0027Participate in development and follow a personal competency development plancurrent
UEERE0015Implement and monitor energy sector environmental and sustainable policies and procedurescurrent

Elective units 118 listed

CodeUnitIn this product
BSBOPS203Deliver a service to customerscurrent
CPCWHS1001Prepare to work safely in the construction industrycurrent
CPPHES4005Assess household energy use and efficiency improvementscurrent
HLTAID009Provide cardiopulmonary resuscitationcurrent
ICTICT214Operate application software packagescurrent
UEEAS0007Assemble, mount and connect control gear and switchgearcurrent
UEEAS0008Fabricate and assemble bus barscurrent
UEEAS0009Mount and wire control panel equipmentcurrent
UEECD0011Comply with scheduled and preventative maintenance program processescurrent
UEECD0028Plan an integrated cabling installation systemcurrent
UEECD0035Provide basic instruction in the use of electrotechnology apparatuscurrent
UEECD0050Use and maintain the integrity of a portable gas detection devicecurrent
UEECD0063Write work activity reportscurrent
UEECO0001Estimate electrotechnology projectscurrent
UEECO0002Maintain documentationcurrent
UEECO0015Provide quotations for installation or service jobscurrent
UEECO0017Source and purchase material/parts for installation or service jobscurrent
UEECS0033Use engineering applications software on personal computerscurrent
UEEDV0005Install and maintain cabling for multiple access to telecommunication servicescurrent
UEEDV0008Install, modify and verify coaxial and structured communication copper cablingcurrent
UEEEC0003Assemble and set up basic security systemscurrent
UEEEC0060Repairs basic electronic apparatus faults by replacement of componentscurrent
UEEEC0075Troubleshoot single phase input d.c power suppliescurrent
UEEEL0004Carry out basic repairs to electrical components and equipmentcurrent
UEEEL0007Develop detailed electrical drawingscurrent
UEEEL0016Provide advice on effective and energy efficient lighting productscurrent
UEEEL0017Repair and maintain mechanical components of electrical machinescurrent
UEEEL0022Supply effective and efficient lighting products for domestic and small commercial applicationscurrent
UEEEL0026Align and install traction lift equipmentcurrent
UEEEL0027Carry out low voltage electrical field testing and report findingscurrent
Show the remaining 88 elective units
CodeUnitIn this product
UEEEL0029Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phasecurrent
UEEEL0030Conduct compliance inspection of single phase LV electrical installationscurrent
UEEEL0031Conduct compliance inspection of special LV electrical installationscurrent
UEEEL0032Conduct electrical tests on HV electrical machinescurrent
UEEEL0033Conduct electrical tests on LV electrical machinescurrent
UEEEL0034Conduct mechanical tests on electrical machines and componentscurrent
UEEEL0036Design effective and efficient lighting for residential and commercial buildingscurrent
UEEEL0040Develop compliance policies and plans to conduct an electrical contracting businesscurrent
UEEEL0044Diagnose and rectify faults in complex lift systemscurrent
UEEEL0045Diagnose and rectify faults in traction lift systemscurrent
UEEEL0046Find and repair faults in LV d.c. electrical apparatus and circuitscurrent
UEEEL0049Install and maintain emergency safety systemscurrent
UEEEL0050Install and replace low voltage current transformer meteringcurrent
UEEEL0051Investigate and report on electrical incidents and causescurrent
UEEEL0052Maintain and service traction lift systems and equipmentcurrent
UEEEL0053Maintain operation of electrical marine equipment and systemscurrent
UEEEL0054Maintain operation of electrical mining equipment and systemscurrent
UEEEL0055Overhaul and repair major switchgear and control gearcurrent
UEEEL0056Place and connect electrical coilscurrent
UEEEL0057Plan electrical installations with a low voltage demand up to 400 A per phasecurrent
UEEEL0059Plan low voltage switchboard and control panel layoutscurrent
UEEEL0060Prepare quotations for the supply of effective and efficient lighting products for lighting projectscurrent
UEEEL0061Provide advice on the application of energy efficient lighting for ambient and aesthetic effectcurrent
UEEEL0063Provide photometric data for illumination system designcurrent
UEEEL0064Rewind HV three phase induction machines rated for voltages above 3.3 kVcurrent
UEEEL0065Rewind HV three phase induction machines rated for voltages to 3.3 kVcurrent
UEEEL0066Rewind LV direct current machinescurrent
UEEEL0067Rewind single phase machinescurrent
UEEEL0068Rewind three phase low voltage induction machinescurrent
UEEEL0069Select and arrange equipment for special LV electrical installationscurrent
UEEEL0070Select effective and efficient light sources and luminaries for given locations and designscurrent
UEEEL0071Select low voltage power factor correction equipmentcurrent
UEEEL0072Set up and place LV electrical apparatus and associated circuits into servicecurrent
UEEEL0073Verify compliance and functionality of special LV electrical installationscurrent
UEEEL0074Wind electrical coilscurrent
UEEEL0075Inspect, test and maintain emergency alarm systems and equipmentcurrent
UEEEL0076Inspect, test and maintain emergency lighting systemscurrent
UEEEL0078Install and commission whole current electricity meterscurrent
UEEHA0004Enter a classified hazardous area to undertake work related to electrical equipmentcurrent
UEEHA0020Conduct detailed inspection of electrical installations for hazardous areascurrent
UEEHA0022Determine the explosion-protection requirements to meet a specified classified hazardous areacurrent
UEEHA0025Install explosion-protected equipment and associated apparatus and wiring systemscurrent
UEEHA0026Maintain equipment associated with hazardous areascurrent
UEEHA0038Conduct visual and close inspection of electrical installations for hazardous areascurrent
UEEIC0002Assemble, enter and verify operating instructions in microprocessor equipped devicescurrent
UEEIC0009Develop an electrical integrated system interface for access through a touch screencurrent
UEEIC0011Develop electrical integrated systemscurrent
UEEIC0012Develop structured programs to control external devicescurrent
UEEIC0013Develop, enter and verify discrete control programs for programmable controllerscurrent
UEEIC0014Develop, enter and verify programs in supervisory control and data acquisition systemscurrent
UEEIC0015Develop, enter and verify word and analogue control programs for programmable logic controllerscurrent
UEEIC0018Diagnose and rectify faults in digital controls systemscurrent
UEEIC0020Fault find and repair analogue circuits and components in electronic control systemscurrent
UEEIC0024Plan the electrical installation of integrated systemscurrent
UEEIC0026Provide solutions to fluid circuit operationscurrent
UEEIC0027Provide solutions to pneumatic-hydraulic system operationscurrent
UEEIC0028Provide solutions to problems in industrial control systemscurrent
UEEIC0034Set up industrial field control devicescurrent
UEEIC0038Solve problems in density/level measurement components and systemscurrent
UEEIC0039Solve problems in flow measurement components and systemscurrent
UEEIC0040Solve problems in polyphase electronic power control circuitscurrent
UEEIC0041Solve problems in pressure measurement components and systemscurrent
UEEIC0042Solve problems in single phase electronic power control circuitscurrent
UEEIC0043Solve problems in temperature measurement components and systemscurrent
UEEIC0047Use instrumentation drawings, specifications, standards and equipment manualscurrent
UEERA0035Establish the basic operating conditions of air conditioning systemscurrent
UEERA0036Establish the basic operating conditions of vapour compression systemscurrent
UEERA0059Prepare and connect refrigerant tubing and fittingscurrent
UEERE0050Identify and isolate multiple supply systemscurrent
UEERE0052Assess energy loads and uses for energy efficiency in commercial facilitiescurrent
UEERE0053Assess energy loads and uses for energy efficiency in industrial properties and enterprisescurrent
UEERE0054Conduct site survey for grid-connected photovoltaic and battery storage systemscurrent
UEERE0061Design grid-connected photovoltaic power supply systemscurrent
UEERE0068Develop strategies to address sustainability issues for electrical installationscurrent
UEERE0080Install photovoltaic power conversion equipment to gridcurrent
UEERE0081Install photovoltaic systems to power conversion equipmentcurrent
UEERS0021Assemble and wire electrical rail signalling equipmentcurrent
UEERS0024Install and maintain rail track circuit leads and bondscurrent
UEERS0036Repair rail signalling power and control cablescurrent
UEERS0037Test copper rail signalling cablescurrent
UETDRIS017Perform high voltage field switching operation to a given schedulecurrent
UETDRIS018Perform low voltage field switching operation to a given schedulecurrent
UETDRIS031Maintain insulating oilcurrent
UETDRIS032Solve problems in network equipmentcurrent
UETDRIS033Solve problems in network protectioncurrent
UETDRSB001Perform substation switching operations to a given schedulecurrent
UETDRSB007Install and maintain substation direct current systemscurrent
UETDRSB010Maintain capacitor bank equipmentcurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE40620 or anything else on it is superseded.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.