UEE31710 Certificate III in Hazardous areas - Electrician

deletedthe status token training.gov.au records

Transition clockClosed to new enrolments

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for UEE31710, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
UEE07 — Electrotechnology Training Package
Currency period ends
14 March 2012
Latest release
Release 1 · 29 July 2011
Supersedes
UEE31707
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from UEE31710. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE31707UEE31710equivalent28 July 2011

    The register records this supersession but attaches no note on what changed.

Is UEE31710 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE31710 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE31710 is made of

training.gov.au lists 44 units for UEE31710. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 44 listed

CodeUnitCore or electiveIn this product
UEENEEC001BMaintain documentationN/Anot current
UEENEEC002BSource and purchase material/parts for installation or service jobsN/Anot current
UEENEEC003BProvide quotations for installation or service jobsN/Anot current
UEENEEC010BDeliver a service to customersN/Anot current
UEENEEC028BParticipate in hazardous areas work and competency development activitiesN/Anot current
UEENEED001BUse basic computer applications relevant to a workplaceN/Anot current
UEENEEE001BApply OHS practices in the workplaceN/Anot current
UEENEEE002BDismantle, assemble and fabricate electrotechnology componentsN/Anot current
UEENEEE003BSolve problems in extra-low voltage single path circuitsN/Anot current
UEENEEE004BSolve problems in multiple path d.c. circuitsN/Anot current
UEENEEE005BFix and secure equipmentN/Anot current
UEENEEE007BUse drawings, diagrams, schedules and manualsN/Anot current
UEENEEE008BLay wiring/cabling and terminate accessories for extra-low voltage circuitsN/Anot current
UEENEEE009BComply with scheduled and preventative maintenance program processesN/Anot current
UEENEEE020BProvide basic instruction in the use of electrotechnology apparatusN/Anot current
UEENEEE033BDocument occupational hazards and risks in electrical workN/Anot current
UEENEEG001BSolve problems in electromagnetic circuitsN/Anot current
UEENEEG002BSolve problems in single and three phase low voltage circuitsN/Anot current
UEENEEG003BInstall wiring and accessories for low voltage circuitsN/Anot current
UEENEEG004BInstall low voltage electrical apparatus and associated equipmentN/Anot current
UEENEEG005BVerify compliance and functionality of general electrical installationsN/Anot current
UEENEEG007BSelect and arrange equipment for general electrical installationsN/Anot current
UEENEEG008BFind and repair faults in electrical apparatus and circuitsN/Anot current
UEENEEG009BDevelop and connect control circuitsN/Anot current
UEENEEK042AParticipate in environmentally sustainable work practicesN/Anot current
UEENEEM019AAttend to breakdowns in hazardous areas - coal miningN/Anot current
UEENEEM020AAttend to breakdowns in hazardous areas - gas atmospheresN/Anot current
UEENEEM021AAttend to breakdowns in hazardous areas - dust atmospheresN/Anot current
UEENEEM022AAttend to breakdowns in hazardous areas - pressurisationN/Anot current
UEENEEM023AInstall explosion-protected equipment and wiring systems - coal miningN/Anot current
Show the remaining 14 units
CodeUnitCore or electiveIn this product
UEENEEM024AInstall explosion-protected equipment and wiring systems - gas atmospheresN/Anot current
UEENEEM026AInstall explosion-protected equipment and wiring systems - pressurisationN/Anot current
UEENEEM027AMaintain equipment in hazardous areas - coal miningN/Anot current
UEENEEM028AMaintain equipment in hazardous areas - gas atmospheresN/Anot current
UEENEEM029AMaintain equipment in hazardous areas - dust atmospheresN/Anot current
UEENEEM030AMaintain equipment in hazardous areas - pressurisationN/Anot current
UEENEEM038AConduct testing of hazardous areas installations - coal miningN/Anot current
UEENEEM039AConduct testing of hazardous areas installations - gas atmospheresN/Anot current
UEENEEM040AConduct testing of hazardous areas installations - dust atmospheresN/Anot current
UEENEEM041AConduct testing of hazardous area installations - pressurisationN/Anot current
UEENEEM042AConduct visual inspection of hazardous areas installationsN/Anot current
UEENEEM076AUse and maintain the integrity of a portable gas detection deviceN/Anot current
UEENEEM077AInstall and maintain the integrity of fixed gas detection equipmentN/Anot current
UEENEEM080AReport on the integrity of explosion-protected equipment in a hazardous areaN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE31710 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.