UEE41020 Certificate IV in Energy Management and Control

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEE41020 ended on 28 July 2025 — 13 months ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 30 July 2026 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEE — Electrotechnology Training Package
Currency period ends
28 July 2025
Latest release
Release 4 · 20 December 2022 · 4 releases in all
Supersedes
UEE41011
Superseded by
UEE41025 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEE41020Superseded — equivalentCertificate IV in Energy Management and Control
  2. equivalent
  3. UEE41025CurrentCertificate IV in Energy Management and Control

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE41011UEE41020not equivalent4 October 2020

    The register records this supersession but attaches no note on what changed.

  • UEE41020UEE41025equivalent29 July 2025

    This qualification replaces and is equivalent to UEE41020 Certificate IV in Energy Management and Control

Is UEE41020 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE41020 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE41020 is made of

training.gov.au lists 55 units for UEE41020: 5 core and 50 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 5 listed

CodeUnitIn this product
UEECD0010Compile and produce an energy sector detailed reportcurrent
UEECD0024Implement and monitor energy sector WHS policies and procedurescurrent
UEECD0027Participate in development and follow a personal competency development plancurrent
UEERE0014Develop strategies to address sustainability issues for electrical installationsnot current
UEERE0015Implement and monitor energy sector environmental and sustainable policies and procedurescurrent

Elective units 50 listed

CodeUnitIn this product
BSBOPS203Deliver a service to customerscurrent
CPCWHS1001Prepare to work safely in the construction industrycurrent
CPPHES4005Assess household energy use and efficiency improvementscurrent
HLTAID009Provide cardiopulmonary resuscitationcurrent
ICTICT214Operate application software packagescurrent
UEECD0011Comply with scheduled and preventative maintenance program processescurrent
UEECD0028Plan an integrated cabling installation systemcurrent
UEECD0035Provide basic instruction in the use of electrotechnology apparatuscurrent
UEECD0061Write specifications for refrigeration and air conditioning engineering projectscurrent
UEECO0002Maintain documentationcurrent
UEECO0015Provide quotations for installation or service jobscurrent
UEECO0017Source and purchase material/parts for installation or service jobscurrent
UEECS0033Use engineering applications software on personal computerscurrent
UEEDV0005Install and maintain cabling for multiple access to telecommunication servicescurrent
UEEDV0008Install, modify and verify coaxial and structured communication copper cablingcurrent
UEEEC0060Repairs basic electronic apparatus faults by replacement of componentscurrent
UEEEC0075Troubleshoot single phase input d.c power suppliescurrent
UEEEL0007Develop detailed electrical drawingscurrent
UEEEL0016Provide advice on effective and energy efficient lighting productscurrent
UEEEL0022Supply effective and efficient lighting products for domestic and small commercial applicationscurrent
UEEEL0029Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phasecurrent
UEEEL0030Conduct compliance inspection of single phase LV electrical installationscurrent
UEEEL0031Conduct compliance inspection of special LV electrical installationscurrent
UEEEL0036Design effective and efficient lighting for residential and commercial buildingscurrent
UEEEL0040Develop compliance policies and plans to conduct an electrical contracting businesscurrent
UEEEL0044Diagnose and rectify faults in complex lift systemscurrent
UEEEL0049Install and maintain emergency safety systemscurrent
UEEEL0050Install and replace low voltage current transformer meteringcurrent
UEEEL0051Investigate and report on electrical incidents and causescurrent
UEEEL0057Plan electrical installations with a low voltage demand up to 400 A per phasecurrent
Show the remaining 20 elective units
CodeUnitIn this product
UEEEL0059Plan low voltage switchboard and control panel layoutscurrent
UEEEL0060Prepare quotations for the supply of effective and efficient lighting products for lighting projectscurrent
UEEEL0061Provide advice on the application of energy efficient lighting for ambient and aesthetic effectcurrent
UEEEL0063Provide photometric data for illumination system designcurrent
UEEEL0070Select effective and efficient light sources and luminaries for given locations and designscurrent
UEEEL0071Select low voltage power factor correction equipmentcurrent
UEEEL0072Set up and place LV electrical apparatus and associated circuits into servicecurrent
UEEEL0073Verify compliance and functionality of special LV electrical installationscurrent
UEEEL0075Inspect, test and maintain emergency alarm systems and equipmentcurrent
UEEEL0076Inspect, test and maintain emergency lighting systemscurrent
UEEEL0078Install and commission whole current electricity meterscurrent
UEEIC0002Assemble, enter and verify operating instructions in microprocessor equipped devicescurrent
UEEIC0011Develop electrical integrated systemscurrent
UEEIC0013Develop, enter and verify discrete control programs for programmable controllerscurrent
UEEIC0038Solve problems in density/level measurement components and systemscurrent
UEEIC0039Solve problems in flow measurement components and systemscurrent
UEEIC0041Solve problems in pressure measurement components and systemscurrent
UEEIC0043Solve problems in temperature measurement components and systemscurrent
UEERE0052Assess energy loads and uses for energy efficiency in commercial facilitiescurrent
UEERE0053Assess energy loads and uses for energy efficiency in industrial properties and enterprisescurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE41020 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.