Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- UEP50318Superseded — equivalentDiploma of ESI Generation (Maintenance)
- =equivalent
- UEP50322Deleted from the registerDiploma of ESI Generation (Maintenance)
The register does not list a current endpoint for this chain: UEP50322 is the last product it points at, and UEP50322 is not marked current either.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEP50318 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEP50318 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEP50318 is made of
training.gov.au lists 113 units for UEP50318: 31 core and 82 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 31 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09002B | Interpret technical drawing | !not current |
| MEM12023A | Perform engineering measurements | !not current |
| MEM18001C | Use hand tools | !not current |
| MEM18002B | Use power tools/hand held operations | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEPMNT351 | Test and commission electrical equipment | ●current |
| UEPMNT421 | Conduct technical inspection of process plant and equipment | ●current |
| UEPOPS202 | Apply quality systems to work | !not current |
| UEPOPS337 | Maintain quality systems within the team | !not current |
| UEPOPS338 | Facilitate workplace communication | !not current |
| UEPOPS416 | Monitor implementation of quality control for production and maintenance | !not current |
| UEPOPS417 | Monitor and implement environmental site plans and procedures | !not current |
| UEPOPS425 | Produce maintenance plans for generation production plant | !not current |
| UEPOPS430 | Control permit to work operations | !not current |
| UEPOPS439 | Plan and organise work | !not current |
| UEPOPS440 | Coordinate team activities | !not current |
| UEPOPS501 | Manage Work, Health and Safety policy and procedures | !not current |
| UEPOPS505 | Produce maintenance strategies for generation production plant | !not current |
Show the remaining 1 core unit
| Code | Unit | In this product |
|---|---|---|
| UEPOPS507 | Conduct project management | !not current |
Elective units 82 listed
| Code | Unit | In this product |
|---|---|---|
| BSBCUS501 | Manage quality customer service | !not current |
| BSBINM501 | Manage an information or knowledge management system | !not current |
| BSBINN502 | Build and sustain an innovative work environment | !not current |
| BSBLED501 | Develop a workplace learning environment | !not current |
| BSBMGT502 | Manage people performance | !not current |
| BSBMGT516 | Facilitate continuous improvement | !not current |
| BSBMGT517 | Manage operational plan | !not current |
| BSBWHS501 | Ensure a safe workplace | !not current |
| BSBWOR501 | Manage personal work priorities and professional development | !not current |
| BSBWOR502 | Lead and manage team effectiveness | !not current |
| MEM05007C | Perform manual heating and thermal cutting | !not current |
| MEM05012C | Perform routine manual metal arc welding | !not current |
| MEM05015D | Weld using manual metal arc welding process | !not current |
| MEM05016C | Perform advanced welding using manual metal arc welding process | !not current |
| MEM05017D | Weld using gas metal arc welding process | !not current |
| MEM05018C | Perform advanced welding using gas metal arc welding process | !not current |
| MEM05024B | Perform welding supervision | !not current |
| MEM05026C | Apply welding principles | !not current |
| MEM05050B | Perform routine gas metal arc welding | !not current |
| MEM05051A | Select welding processes | !not current |
| MEM05052A | Apply safe welding practices | !not current |
| MEM07005C | Perform general machining | !not current |
| MEM07006C | Perform lathe operations | !not current |
| MEM07007C | Perform milling operations | !not current |
| MEM07008D | Perform grinding operations | !not current |
| MEM07011B | Perform complex milling operations | !not current |
| MEM07012B | Perform complex grinding operations | !not current |
| MEM07021B | Perform complex lathe operations | !not current |
| MEM12003B | Perform precision mechanical measurement | !not current |
| MEM12024A | Perform computations | !not current |
Show the remaining 52 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM18003C | Use tools for precision work | !not current |
| MEM18006C | Repair and fit engineering components | !not current |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | !not current |
| MEM18009B | Perform levelling and alignment of machines and engineering components | !not current |
| MEM18010C | Perform equipment condition monitoring and recording | !not current |
| MEM18055B | Dismantle, replace and assemble engineering components | !not current |
| UEENEEC005B | Estimate electrotechnology projects | !not current |
| UEPMNT302 | Install and maintain industrial pipe work | ●current |
| UEPMNT303 | Maintain mechanical valves | ●current |
| UEPMNT304 | Maintain mechanical pumps | ●current |
| UEPMNT305 | Maintain industrial fans | ●current |
| UEPMNT307 | Maintain industrial screens, strainers and filters | ●current |
| UEPMNT308 | Maintain conveyors and associated equipment | ●current |
| UEPMNT309 | Maintain material feeders | ●current |
| UEPMNT310 | Maintain material crushers | ●current |
| UEPMNT312 | Maintain industrial pressure vessels | ●current |
| UEPMNT314 | Maintain hydro turbines | ●current |
| UEPMNT317 | Diagnose and repair faults in mechanical equipment | ●current |
| UEPMNT318 | Conduct generator mechanical maintenance | ●current |
| UEPMNT401 | Install and maintain complex mechanical seals | ●current |
| UEPMNT402 | Conduct complex levelling and alignment | ●current |
| UEPMNT403 | Maintain complex mechanical valves | ●current |
| UEPMNT404 | Maintain complex mechanical pumps | ●current |
| UEPMNT408 | Install hydro turbines | ●current |
| UEPMNT419 | Perform civil drafting | ●current |
| UEPMNT422 | Conduct performance testing on process plant and equipment | ●current |
| UEPOPS301 | Conduct single energy source isolation procedures for permit to work | !not current |
| UEPOPS369 | Respond to a critical incident | !not current |
| UEPOPS402 | Conduct multiple energy source isolation procedures for permit to work | !not current |
| UEPOPS403 | Coordinate permit to work system | !not current |
| UEPOPS404 | Coordinate first response team operation | !not current |
| UEPOPS420 | Coordinate network/system | !not current |
| UEPOPS422 | Schedule generation | !not current |
| UEPOPS454 | Coordinate response to critical incidents | !not current |
| UEPOPS456 | Perform switching to a switching program | !not current |
| UEPOPS457 | Control electrical energy production | !not current |
| UEPOPS502 | Manage permit to work system | !not current |
| UEPOPS508 | Manage commissioning and decommissioning | !not current |
| UEPOPS509 | Manage quality control procedures | !not current |
| UEPOPS510 | Monitor power generation plant reliability | !not current |
| UEPOPS511 | Tune process plant and equipment | !not current |
| UEPOPS512 | Manage high voltage network system | !not current |
| UEPOPS513 | Manage operational crisis to maintain or restore power system integrity | !not current |
| UEPOPS515 | Coordinate power generation | !not current |
| UEPOPS520 | Evaluate cost estimations and initiate appropriate solutions | !not current |
| UEPOPS523 | Manage critical incidents | !not current |
| UEPOPS524 | Evaluate scheduling of generation plant | !not current |
| UEPOPS525 | Coordinate and direct switching program | !not current |
| UEPOPS526 | Coordinate electrical energy production | !not current |
| UEPOPS527 | Manage first response team | !not current |
| UEPOPS528 | Manage environmental management systems | !not current |
| UEPOPS529 | Manage operational strategies for power production | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEP training product on the register · Search all training products
Is UEP50318 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.