Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for MEM05016C and for its training package MEM05 (release 11.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is MEM05016C on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM05016C sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
Where MEM05016C is used
training.gov.au lists MEM05016C inside 23 training products, none of them current. Every one of them is below, with the register's own core or elective flag for MEM05016C in that product.
Products no longer current 23 listed
The register still records MEM05016C inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.
| Code | Training product | Type | MEM05016C is |
|---|---|---|---|
| LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification | ◇elective |
| MEASS00113 | Aircraft welding using the manual metal arc welding process - aluminium alloys | Skill set | ◇elective |
| MEASS00114 | Aircraft welding using the manual metal arc welding process - carbon and low alloy steels | Skill set | ◇elective |
| MEASS00115 | Aircraft welding using the manual metal arc welding process - copper based alloys | Skill set | ◇elective |
| MEASS00116 | Aircraft welding using the manual metal arc welding process - corrosion and heat resisting steels | Skill set | ◇elective |
| MEASS00117 | Aircraft welding using the manual metal arc welding process - magnesium alloys | Skill set | ◇elective |
| MEASS00118 | Aircraft welding using the manual metal arc welding process - nickel alloys | Skill set | ◇elective |
| MEASS00119 | Aircraft welding using the manual metal arc welding process - titanium alloys | Skill set | ◇elective |
| MEASS00386 | MTA039 Aircraft welding using the manual metal arc welding process - aluminium alloys | Skill set | ◇elective |
| MEASS00387 | MTA040 Aircraft welding using the manual metal arc welding process - magnesium alloys | Skill set | ◇elective |
Show the remaining 13 products no longer current
| Code | Training product | Type | MEM05016C is |
|---|---|---|---|
| MEASS00388 | MTA041 Aircraft welding using the manual metal arc welding process - carbon and low alloy steels | Skill set | ◇elective |
| MEASS00389 | MTA042 Aircraft welding using manual metal arc welding process - corrosion and heat resisting steels | Skill set | ◇elective |
| MEASS00390 | MTA043 Aircraft welding using the manual metal arc welding process - nickel alloys | Skill set | ◇elective |
| MEASS00391 | MTA044 Aircraft welding using the manual metal arc welding process - copper based alloys | Skill set | ◇elective |
| MEASS00392 | MTA045 Aircraft welding using the manual metal arc welding process - titanium alloys | Skill set | ◇elective |
| MEM30305 | Certificate III in Engineering - Fabrication Trade | Qualification | ◇elective |
| MEM40105 | Certificate IV in Engineering | Qualification | ◇elective |
| MEM50105 | Diploma of Engineering - Advanced Trade | Qualification | ◇elective |
| UEG40118 | Certificate IV in Gas Supply Industry Operations | Qualification | ◇elective |
| UEP40412 | Certificate IV in ESI Generation Maintenance (Fabrication) | Qualification | ◇elective |
| UEP40418 | Certificate IV in ESI Generation Maintenance (Fabrication) | Qualification | ◆core |
| UEP50312 | Diploma of ESI Generation (Maintenance) | Qualification | ◇elective |
| UEP50318 | Diploma of ESI Generation (Maintenance) | Qualification | ◇elective |
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is MEM05016C still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.