Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for UEP40418 and for its training package UEP (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is UEP40418 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEP40418 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEP40418 is made of
training.gov.au lists 78 units for UEP40418: 26 core and 52 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 26 listed
| Code | Unit | In this product |
|---|---|---|
| MEM05007C | Perform manual heating and thermal cutting | !not current |
| MEM05012C | Perform routine manual metal arc welding | !not current |
| MEM05015D | Weld using manual metal arc welding process | !not current |
| MEM05016C | Perform advanced welding using manual metal arc welding process | !not current |
| MEM05017D | Weld using gas metal arc welding process | !not current |
| MEM05018C | Perform advanced welding using gas metal arc welding process | !not current |
| MEM05024B | Perform welding supervision | !not current |
| MEM05026C | Apply welding principles | !not current |
| MEM05050B | Perform routine gas metal arc welding | !not current |
| MEM05051A | Select welding processes | !not current |
| MEM05052A | Apply safe welding practices | !not current |
| MEM09002B | Interpret technical drawing | !not current |
| MEM12023A | Perform engineering measurements | !not current |
| MEM18001C | Use hand tools | !not current |
| MEM18002B | Use power tools/hand held operations | !not current |
| MEM18003C | Use tools for precision work | !not current |
| MEM18006C | Repair and fit engineering components | !not current |
| MEM18055B | Dismantle, replace and assemble engineering components | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEPMNT302 | Install and maintain industrial pipe work | ●current |
| UEPOPS202 | Apply quality systems to work | !not current |
| UEPOPS337 | Maintain quality systems within the team | !not current |
| UEPOPS417 | Monitor and implement environmental site plans and procedures | !not current |
| UEPOPS430 | Control permit to work operations | !not current |
| UEPOPS439 | Plan and organise work | !not current |
Elective units 52 listed
| Code | Unit | In this product |
|---|---|---|
| BSBCUS401 | Coordinate implementation of customer service strategies | !not current |
| BSBINM401 | Implement workplace information system | !not current |
| BSBINN301 | Promote innovation in a team environment | !not current |
| BSBLDR402 | Lead effective workplace relationships | !not current |
| BSBLDR403 | Lead team effectiveness | !not current |
| BSBLED401 | Develop teams and individuals | !not current |
| BSBMGT402 | Implement operational plan | !not current |
| BSBMGT403 | Implement continuous improvement | !not current |
| BSBWOR404 | Develop work priorities | !not current |
| CPCCCM2007B | Use explosive power tools | !not current |
| CPCCLDG3001A | Licence to perform dogging | !not current |
| CPCCLRG3001A | Licence to perform rigging basic level | !not current |
| CPCCLRG3002A | Licence to perform rigging intermediate level | !not current |
| CPCCLSF2001A | Licence to erect, alter and dismantle scaffolding basic level | !not current |
| CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | !not current |
| MEM05004C | Perform routine oxy acetylene welding | !not current |
| MEM05005B | Carry out mechanical cutting | !not current |
| MEM05011D | Assemble fabricated components | !not current |
| MEM05019D | Weld using gas tungsten arc welding process | !not current |
| MEM05020C | Perform advanced welding using gas tungsten arc welding process | !not current |
| MEM05022C | Perform advanced welding using oxy acetylene welding process | !not current |
| MEM05036C | Repair/replace/modify fabrications | !not current |
| MEM05043B | Perform welds to code standards using gas metal arc welding process | !not current |
| MEM05044B | Perform welds to code standards using gas tungsten arc welding process | !not current |
| MEM05045B | Perform pipe welds to code standards using manual metal arc welding process | !not current |
| MEM05046B | Perform welds to code standards using manual metal arc welding process | !not current |
| MEM05049B | Perform routine gas tungsten arc welding | !not current |
| MEM12007D | Mark off/out structural fabrications and shapes | !not current |
| MEM12024A | Perform computations | !not current |
| RIIHAN309E | Conduct telescopic materials handler operations | !not current |
Show the remaining 22 elective units
| Code | Unit | In this product |
|---|---|---|
| TAEDEL301 | Provide work skill instruction | !not current |
| TLILIC0002 | Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) | !not current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
| TLILIC0005 | Licence to operate a boom-type elevating work platform (boom length 11 metres or more) | ●current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEPMNT340 | Fabricate metal structures and components | ●current |
| UEPMNT351 | Test and commission electrical equipment | ●current |
| UEPMNT421 | Conduct technical inspection of process plant and equipment | ●current |
| UEPMNT422 | Conduct performance testing on process plant and equipment | ●current |
| UEPOPS301 | Conduct single energy source isolation procedures for permit to work | !not current |
| UEPOPS338 | Facilitate workplace communication | !not current |
| UEPOPS402 | Conduct multiple energy source isolation procedures for permit to work | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEP training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is UEP40418 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.