When must new enrolments into UEP40512 stop?

New enrolments are not permitted from 31 October 2019 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in UEP40512?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEP40512 Certificate IV in ESI Generation Maintenance - Electrical…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEP40512Superseded — equivalentCertificate IV in ESI Generation Maintenance - Electrical Electronics
equivalent
UEP40318Superseded — equivalentCertificate IV in ESI Generation Maintenance - Electrical Electronics
equivalent
UEP40322CurrentCertificate IV in ESI Generation Maintenance - Electrical Electronics

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEP40512UEP40318equivalent30 October 2018
The register records this supersession but attaches no note on what changed.

Is UEP40512 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEP40512 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEP40512 is made of

training.gov.au lists 84 units for UEP40512. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 84 listed

Code	Unit	Core or elective	In this product
BSBCUS401B	Coordinate implementation of customer service strategies	`N/A`	not current
BSBINM401A	IMPLEMENT WORKPLACE INFORMATION SYSTEM	`N/A`	not current
BSBINN301A	Promote innovation in a team environment	`N/A`	not current
BSBLED401A	Develop teams and individuals	`N/A`	not current
BSBMGT402A	Implement operational plan	`N/A`	not current
BSBMGT403A	Implement continuous improvement	`N/A`	not current
BSBWOR401A	Establish effective workplace relationships	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
BSBWOR404B	Develop work priorities	`N/A`	not current
TAEDEL301A	Provide work skill instruction	`N/A`	not current
UEENEEC001B	Maintain documentation	`N/A`	not current
UEENEEC005B	Estimate electrotechnology projects	`N/A`	not current
UEENEEC010B	Deliver a service to customers	`N/A`	not current
UEENEED101A	Use computer applications relevant to a workplace	`N/A`	not current
UEENEED104A	Use engineering applications software on personal computers	`N/A`	not current
UEENEEE101A	Apply Occupational Health and Safety regulations, codes and practices in the workplace	`N/A`	not current
UEENEEE102A	Fabricate, assemble and dismantle utilities industry components	`N/A`	not current
UEENEEE104A	Solve problems in d.c. circuits	`N/A`	not current
UEENEEE105A	Fix and secure electrotechnology equipment	`N/A`	not current
UEENEEE107A	Use drawings, diagrams, schedules, standards, codes and specifications	`N/A`	not current
UEENEEE117A	Implement and monitor energy sector OHS policies and procedures	`N/A`	not current
UEENEEE124A	Compile and produce an energy sector detailed report	`N/A`	not current
UEENEEE137A	Document and apply measures to control OHS risks associated with electrotechnology work	`N/A`	not current
UEENEEF102A	Install and maintain cabling for multiple access to telecommunication services	`N/A`	not current
UEENEEF105A	Install and modify optical fibre performance data communication cabling	`N/A`	not current
UEENEEG006A	Solve problems in single and three phase low voltage machines	`N/A`	not current
UEENEEG033A	Solve problems in single and three phase low voltage electrical apparatus and circuits	`N/A`	not current
UEENEEG063A	Arrange circuits, control and protection for general electrical installations	`N/A`	not current
UEENEEG101A	Solve problems in electromagnetic devices and related circuits	`N/A`	not current
UEENEEG102A	Solve problems in low voltage a.c. circuits	`N/A`	not current

Show the remaining 54 units

Code	Unit	Core or elective	In this product
UEENEEG106A	Terminate cables, cords and accessories for low voltage circuits	`N/A`	not current
UEENEEG108A	Trouble-shoot and repair faults in low voltage electrical apparatus and circuits	`N/A`	not current
UEENEEG109A	Develop and connect electrical control circuits	`N/A`	not current
UEENEEI101A	Use instrumentation drawings, specification, standards and equipment manuals	`N/A`	not current
UEENEEI107A	Install instrumentation and control cabling and tubing	`N/A`	not current
UEENEEI108A	Install instrumentation and control apparatus and associated equipment	`N/A`	not current
UEPMNT319B	Maintain and test fixed fire protection systems	`N/A`	not current
UEPMNT345B	Install electronic equipment	`N/A`	not current
UEPMNT346B	Maintain electrical equipment	`N/A`	not current
UEPMNT347B	Maintain complex electrical equipment	`N/A`	not current
UEPMNT348B	Maintain electrical electronic equipment	`N/A`	not current
UEPMNT350B	Modify electrical equipment	`N/A`	not current
UEPMNT351B	Test and commission electrical equipment	`N/A`	not current
UEPMNT352B	Test and commission electronic electrical equipment	`N/A`	not current
UEPMNT355B	Install complex/electronic instrumentation equipment	`N/A`	not current
UEPMNT356B	Maintain instrumentation equipment	`N/A`	not current
UEPMNT357B	Diagnose and repair faults in instrumentation equipment	`N/A`	not current
UEPMNT358B	Modify instrumentation equipment	`N/A`	not current
UEPMNT359B	Test and commission instrumentation equipment	`N/A`	not current
UEPMNT362A	Maintain Wind Turbine Control Systems	`N/A`	not current
UEPMNT366A	Maintain power plant inverter systems	`N/A`	not current
UEPMNT410B	Diagnose and repair faults in electronic equipment	`N/A`	not current
UEPMNT411B	Diagnose and repair faults in complex electrical equipment	`N/A`	not current
UEPMNT412B	Modify complex electrical equipment	`N/A`	not current
UEPMNT413B	Modify electronic electrical equipment	`N/A`	not current
UEPMNT414B	Test and commission complex electrical equipment	`N/A`	not current
UEPMNT415B	Diagnose and repair faults in complex refrigeration/air conditioning equipment	`N/A`	not current
UEPMNT416B	Overhaul electrical generator	`N/A`	not current
UEPMNT417B	Inspect electrical generators and diagnose faults	`N/A`	not current
UEPMNT421B	Conduct technical inspection of process plant and equipment	`N/A`	not current
UEPMNT422B	Conduct performance testing on process plant and equipment	`N/A`	not current
UEPMNT424B	Monitor efficiency of thermal steam cycle power plant	`N/A`	not current
UEPMNT425B	Maintain complex instrumentation equipment	`N/A`	not current
UEPMNT426B	Maintain electronic instrumentation equipment	`N/A`	not current
UEPMNT427B	Diagnose and repair faults in complex instrumentation equipment	`N/A`	not current
UEPMNT428B	Modify complex instrumentation equipment	`N/A`	not current
UEPMNT429B	Modify electronic instrumentation equipment	`N/A`	not current
UEPMNT430B	Test and commission complex instrumentation equipment	`N/A`	not current
UEPMNT431B	Test and commission electronic instrumentation equipment	`N/A`	not current
UEPMNT432B	Write programs for control systems	`N/A`	not current
UEPMNT433B	Conduct routine generator electrical maintenance	`N/A`	not current
UEPMNT434A	Diagnose and Repair Faults in Wind Turbine Control Systems	`N/A`	not current
UEPMNT436A	Test and Commission Wind Turbine Control Systems	`N/A`	not current
UEPMNT440A	Diagnose and repair faults in power plant inverter systems	`N/A`	not current
UEPMNT441A	Test and commission power plant inverter systems	`N/A`	not current
UEPOPS202B	Apply quality systems to work	`N/A`	not current
UEPOPS301B	Conduct single energy source isolation procedures for permit to work	`N/A`	not current
UEPOPS337B	Maintain quality systems within the team	`N/A`	not current
UEPOPS338B	Facilitate effective workplace communication	`N/A`	not current
UEPOPS371A	Carry out operational checks on in-service electrical plant	`N/A`	not current
UEPOPS402B	Conduct multiple energy source isolation procedures for permit to work	`N/A`	not current
UEPOPS417B	Monitor and implement environmental plans and procedures	`N/A`	not current
UEPOPS430B	Control permit to work operations	`N/A`	not current
UEPOPS439B	Plan and organise work	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEP training product on the register · Search all training products

Is UEP40512 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.