Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- UEP50418Superseded — equivalentDiploma of ESI Generation Maintenance - Electrical Electronic
- =equivalent
- UEP50422Deleted from the registerDiploma of ESI Generation Maintenance - Electrical Electronic
The register does not list a current endpoint for this chain: UEP50422 is the last product it points at, and UEP50422 is not marked current either.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEP50418 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEP50418 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEP50418 is made of
training.gov.au lists 65 units for UEP50418: 25 core and 40 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 25 listed
| Code | Unit | In this product |
|---|---|---|
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEENEEG109A | Develop and connect electrical control circuits | !not current |
| UEPOPS202 | Apply quality systems to work | !not current |
| UEPOPS337 | Maintain quality systems within the team | !not current |
| UEPOPS338 | Facilitate workplace communication | !not current |
| UEPOPS371 | Carry out operational checks on in-service electrical plant | !not current |
| UEPOPS417 | Monitor and implement environmental site plans and procedures | !not current |
| UEPOPS430 | Control permit to work operations | !not current |
| UEPOPS439 | Plan and organise work | !not current |
| UEPOPS501 | Manage Work, Health and Safety policy and procedures | !not current |
| UEPOPS507 | Conduct project management | !not current |
| UEPOPS509 | Manage quality control procedures | !not current |
Elective units 40 listed
| Code | Unit | In this product |
|---|---|---|
| BSBCUS501 | Manage quality customer service | !not current |
| BSBINM501 | Manage an information or knowledge management system | !not current |
| BSBINN502 | Build and sustain an innovative work environment | !not current |
| BSBLED501 | Develop a workplace learning environment | !not current |
| BSBMGT502 | Manage people performance | !not current |
| BSBMGT516 | Facilitate continuous improvement | !not current |
| BSBMGT517 | Manage operational plan | !not current |
| BSBWHS501 | Ensure a safe workplace | !not current |
| BSBWOR501 | Manage personal work priorities and professional development | !not current |
| BSBWOR502 | Lead and manage team effectiveness | !not current |
| UEENEEC005B | Estimate electrotechnology projects | !not current |
| UEENEEE124A | Compile and produce an energy sector detailed report | !not current |
| UEENEEI108A | Install instrumentation and control apparatus and associated equipment | !not current |
| UEPMNT346 | Maintain electrical equipment | ●current |
| UEPMNT347 | Maintain complex electrical equipment | ●current |
| UEPMNT348 | Maintain electrical electronic equipment | ●current |
| UEPMNT350 | Modify electrical equipment | ●current |
| UEPMNT351 | Test and commission electrical equipment | ●current |
| UEPMNT355 | Install complex electronic instrumentation equipment | ●current |
| UEPMNT356 | Maintain instrumentation equipment | ●current |
| UEPMNT357 | Diagnose and repair faults in instrumentation equipment | ●current |
| UEPMNT358 | Modify instrumentation equipment | ●current |
| UEPMNT359 | Test and commission instrumentation equipment | ●current |
| UEPMNT366 | Maintain power plant inverter systems | ●current |
| UEPMNT410 | Diagnose and repair faults in electronic equipment | ●current |
| UEPMNT411 | Diagnose and repair faults in complex electrical equipment | ●current |
| UEPMNT412 | Modify complex electrical equipment | ●current |
| UEPMNT414 | Test and commission complex electrical equipment | ●current |
| UEPMNT417 | Inspect electrical generators and diagnose faults | ●current |
| UEPMNT421 | Conduct technical inspection of process plant and equipment | ●current |
Show the remaining 10 elective units
| Code | Unit | In this product |
|---|---|---|
| UEPMNT422 | Conduct performance testing on process plant and equipment | ●current |
| UEPMNT425 | Maintain complex instrumentation equipment | ●current |
| UEPMNT427 | Diagnose and repair faults in complex instrumentation equipment | ●current |
| UEPMNT428 | Modify complex instrumentation equipment | ●current |
| UEPMNT430 | Test and commission complex instrumentation equipment | ●current |
| UEPOPS301 | Conduct single energy source isolation procedures for permit to work | !not current |
| UEPOPS402 | Conduct multiple energy source isolation procedures for permit to work | !not current |
| UEPOPS440 | Coordinate team activities | !not current |
| UEPOPS508 | Manage commissioning and decommissioning | !not current |
| UEPOPS511 | Tune process plant and equipment | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEP training product on the register · Search all training products
Is UEP50418 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.