UET30712 Certificate III in ESI - Power Systems - Rail Traction

Supersededtraining.gov.au: supersededEquivalent

The currency period for UET30712 ended on 23 September 2019 — 6 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 25 September 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UET12 — Transmission, Distribution and Rail Sector Training Package
Currency period ends
23 September 2019
Latest release
Release 3 · 5 November 2014 · 3 releases in all
Supersedes
UET30309
Superseded by
UET30719 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UET30712Superseded — equivalentCertificate III in ESI - Power Systems - Rail Traction
  2. equivalent
  3. UET30719Superseded — not equivalentCertificate III in ESI - Power Systems - Rail Traction
  4. not equivalent
  5. UET30721CurrentCertificate III in ESI - Rail Traction

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET30309UET30712equivalent30 April 2012

    The register records this supersession but attaches no note on what changed.

  • UET30712UET30719equivalent24 September 2019

    The register records this supersession but attaches no note on what changed.

Is UET30712 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET30712 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET30712 is made of

training.gov.au lists 58 units for UET30712: 0 core and 2 elective, and 56 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Elective units 2 listed

CodeUnitIn this product
TLILIC2015BLicence to drive a medium rigid vehiclenot current
TLILIC2016BLicence to drive a heavy rigid vehiclenot current

Units the register marks neither core nor elective 56 listed

CodeUnitCore or electiveIn this product
AHCARB205AOperate and maintain chainsawsN/Anot current
CPCCLDG3001ALicence to perform doggingN/Anot current
CPCCLHS3001ALicence to operate a personnel and materials hoistN/Anot current
CPCCLHS3002ALicence to operate a materials hoistN/Anot current
CPCCLRG3001ALicence to perform rigging basic levelN/Anot current
CPCCLRG3002ALicence to perform rigging intermediate levelN/Anot current
CPCCLSF2001ALicence to erect, alter and dismantle scaffolding basic levelN/Anot current
CPCCLSF3001ALicence to erect, alter and dismantle scaffolding intermediate levelN/Anot current
TLIC3003ADrive medium rigid vehicleN/Anot current
TLIC3004ADrive heavy rigid vehicleN/Anot current
TLILIC0012ALicence to operate a vehicle loading crane (capacity 10 metre tonnes and above)N/Anot current
TLILIC2001ALicence to operate a forklift truckN/Anot current
TLILIC2005ALicence to operate a boom-type elevating work platform (boom length 11 metres or more)N/Anot current
TLILIC3003ALicence to operate a bridge and gantry craneN/Anot current
TLILIC3008ALicence to operate a slewing mobile crane (up to 20 tonnes)N/Anot current
TLILIC4009ALicence to operate a slewing mobile crane (up to 60 tonnes)N/Anot current
TLILIC4011ALicence to operate a slewing mobile crane (over 100 tonnes)N/Anot current
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplaceN/Anot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsN/Anot current
UEENEEE104ASolve problems in d.c. circuitsN/Anot current
UEENEEE105AFix and secure electrotechnology equipmentN/Anot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsN/Anot current
UEENEEE108ALay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuitsN/Anot current
UEENEEG101ASolve problems in electromagnetic devices and related circuitsN/Anot current
UEENEEG102ASolve problems in low voltage a.c. circuitsN/Anot current
UEENEEG106ATerminate cables, cords and accessories for low voltage circuitsN/Anot current
UETTDRDP11AInspect overhead poles-structures and electrical apparatusN/Anot current
UETTDRDP12AMaintain overhead energised low voltage conductors and cablesN/Anot current
UETTDREL11AApply sustainable energy and environmental proceduresN/Anot current
UETTDREL12AOperate plant and equipment near live electrical conductors and apparatusN/Anot current
Show the remaining 26 units
CodeUnitCore or electiveIn this product
UETTDREL16AWorking safely near live electrical apparatusN/Anot current
UETTDRIS41AInstall network infrastructure electrical equipmentN/Anot current
UETTDRIS42AMaintain network infrastructure electrical equipmentN/Anot current
UETTDRIS43APerform low voltage field switching operation to a given scheduleN/Anot current
UETTDRIS44APerform HV field switching operation to a given scheduleN/Anot current
UETTDRIS52AInstall and maintain poles, structures and associated hardwareN/Anot current
UETTDRIS54AInstall and maintain poles, structures and overhead conductors and cablesN/Anot current
UETTDRIS57AConduct visual checking and treatment of power system poles and structuresN/Anot current
UETTDRIS61AInstall mobile generation set for synchronised LV GensetN/Anot current
UETTDRRT21AInstall traction overhead wiring systemsN/Anot current
UETTDRRT22AMaintain traction overhead wiring systemsN/Anot current
UETTDRRT23AInstall rail traction bondsN/Anot current
UETTDRRT24AMaintain rail traction bondsN/Anot current
UETTDRRT25AInstall overhead rail traction configurationsN/Anot current
UETTDRRT26AMaintain overhead rail traction configurationsN/Anot current
UETTDRRT27AInstall overhead traction components and equipmentN/Anot current
UETTDRRT28AMaintain overhead traction components and equipmentN/Anot current
UETTDRRT29AOperate rail road traction height access equipmentN/Anot current
UETTDRRT30APerform to a given schedule rail traction switching operationsN/Anot current
UETTDRRT99ATest and verify rail traction installationsN/Anot current
UETTDRSB39APerform power system substation switching operation to a given scheduleN/Anot current
UETTDRTP26AInstall transmission structures and associated hardwareN/Anot current
UETTDRTP27AMaintain transmission structures and associated hardwareN/Anot current
UETTDRTP29AInstall and maintain transmission overhead conductors and cablesN/Anot current
UETTDRTP30AInspect transmission overhead structures and electrical apparatusN/Anot current
UETTDRVC29AControl vegetation whilst performing lineworkN/Anot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Is UET30712 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.