Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UET40421 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UET40421 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UET40421 is made of
training.gov.au lists 83 units for UET40421: 14 core and 69 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 14 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCLDG3001 | Licence to perform dogging | ●current |
| TLILIC0005 | Licence to operate a boom-type elevating work platform (boom length 11 metres or more) | ●current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UETDREL001 | Apply environmental requirements | ●current |
| UETDREL004 | Operate plant and equipment in the vicinity of live electrical apparatus | ●current |
| UETDREL005 | Work safely in the vicinity of live electrical apparatus | ●current |
| UETDRIS005 | Implement & monitor power system environmental & sustainable energy management policies & procedures | !not current |
| UETDRIS006 | Implement and monitor the power system organisational WHS/OHS policies, procedures and programs | !not current |
Elective units 69 listed
| Code | Unit | In this product |
|---|---|---|
| AHCMOM213 | Operate and maintain chainsaws | ●current |
| BSBINS402 | Coordinate workplace information systems | ●current |
| BSBLDR413 | Lead effective workplace relationships | ●current |
| BSBLDR414 | Lead team effectiveness | ●current |
| BSBOPS402 | Coordinate business operational plans | ●current |
| BSBSTR402 | Implement continuous improvement | ●current |
| CPCCLRG3001 | Licence to perform rigging basic level | ●current |
| UETDRDO001 | Inspect overhead poles, structures and electrical apparatus | ●current |
| UETDRDO003 | Maintain energised high voltage distribution overhead electrical apparatus (glove and barrier) | ●current |
| UETDRDO004 | Maintain energised high voltage distribution overhead electrical apparatus (stick) | ●current |
| UETDRDO005 | Maintain overhead energised low voltage distribution network | ●current |
| UETDRDO006 | Maintain, test and verify distribution overhead network | ●current |
| UETDRDS008 | Draft and layout a power system distribution substation minor upgrade | !not current |
| UETDRDS009 | Draft and layout a power system overhead distribution extension | !not current |
| UETDRDS010 | Draft and layout a power system street lighting system | !not current |
| UETDRDS011 | Draft and layout a power system underground distribution extension | !not current |
| UETDRDU001 | Conduct high voltage testing of underground power cable system | ●current |
| UETDRDU003 | Install and maintain gas and oil pressure systems for specialised underground cables | !not current |
| UETDRDU006 | Install and maintain polymeric specialised underground cables | !not current |
| UETDRDU008 | Install gas and oil filled specialised underground cables | !not current |
| UETDRDU009 | Install, test and verify distribution underground cable installations | ●current |
| UETDRDU010 | Joint, terminate and maintain energised low voltage underground paper insulated cable | ●current |
| UETDRDU011 | Joint, terminate and maintain energised low voltage underground polymeric cable | ●current |
| UETDRDU012 | Joint, terminate and maintain high voltage underground paper insulated cable | ●current |
| UETDRDU013 | Joint, terminate and maintain high voltage underground polymeric cable | ●current |
| UETDRDU014 | Joint, terminate and maintain low voltage underground paper insulated cable | ●current |
| UETDRDU015 | Joint, terminate and maintain low voltage underground polymeric cable | ●current |
| UETDRDU016 | Lay power cables | ●current |
| UETDRDU017 | Locate faults in underground power cables | ●current |
| UETDRDU018 | Maintain gas and oil filled specialised underground cables | !not current |
Show the remaining 39 elective units
| Code | Unit | In this product |
|---|---|---|
| UETDRDU019 | Transition joint high voltage paper insulated cable to high voltage polymeric cable | ●current |
| UETDRIS001 | Coordinate and direct power system switching schedules | !not current |
| UETDRIS002 | Coordinate power system permit procedures | !not current |
| UETDRIS003 | Develop high voltage switching schedule | !not current |
| UETDRIS004 | Develop low voltage switching schedule | !not current |
| UETDRIS007 | Install and maintain distribution overhead conductors and cables | ●current |
| UETDRIS008 | Install and maintain electrical apparatus | ●current |
| UETDRIS010 | Install and maintain low voltage overhead services | ●current |
| UETDRIS011 | Install and maintain low voltage underground services | ●current |
| UETDRIS012 | Install and maintain poles, structures and hardware | ●current |
| UETDRIS014 | Install and replace energy meters and associated equipment | ●current |
| UETDRIS015 | Install low voltage mobile generator | ●current |
| UETDRIS016 | Install mobile generation set for synchronised HV Genset | !not current |
| UETDRIS017 | Perform high voltage field switching operation to a given schedule | ●current |
| UETDRRT001 | Install overhead rail traction configurations | ●current |
| UETDRRT002 | Install overhead traction components and equipment | ●current |
| UETDRRT003 | Install rail traction bonds | ●current |
| UETDRRT004 | Install traction overhead wiring systems | ●current |
| UETDRRT005 | Maintain energised d.c. traction overhead wiring system | !not current |
| UETDRRT006 | Maintain energised traction overhead electrical apparatus using glove techniques | !not current |
| UETDRRT007 | Maintain energised traction overhead electrical apparatus using stick techniques | !not current |
| UETDRRT008 | Maintain overhead rail traction configurations | ●current |
| UETDRRT009 | Maintain overhead traction components and equipment | ●current |
| UETDRRT010 | Maintain rail traction bonds | ●current |
| UETDRRT011 | Maintain traction overhead wiring systems | ●current |
| UETDRRT012 | Operate rail road height access plant near rail traction systems | ●current |
| UETDRRT013 | Perform rail traction switching operations to a given schedule | ●current |
| UETDRRT014 | Test and verify rail traction installations | ●current |
| UETDRSB001 | Perform substation switching operations to a given schedule | ●current |
| UETDRTO004 | Inspect and maintain transmission overhead network | ●current |
| UETDRTO005 | Inspect transmission structures, conductors and hardware | ●current |
| UETDRTO006 | Install and maintain transmission conductors | ●current |
| UETDRTO007 | Install and maintain transmission structures and hardware | ●current |
| UETDRTO010 | Maintain energised transmission lines using barehand techniques from a helicopter | ●current |
| UETDRTO011 | Maintain energised transmission lines using live work barehand techniques | ●current |
| UETDRTO012 | Maintain energised transmission lines using live work stick techniques | ●current |
| UETDRVC003 | Control vegetation for powerline work | ●current |
| UETDRVC008 | Coordinate vegetation control operations | !not current |
| UETTDRIS65 | Contribute to coordinated HV live working | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UET training product on the register · Search all training products
Is UET40421 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.