UEE30611 Certificate III in Electrical Machine Repair

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEE30611 ended on 3 October 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 5 October 2021 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEE11 — Electrotechnology Training Package
Currency period ends
3 October 2020
Latest release
Release 4 · 17 April 2014 · 4 releases in all
Supersedes
UEE30607
Superseded by
UEE30620 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEE30611Superseded — equivalentCertificate III in Electrical Machine Repair
  2. equivalent
  3. UEE30620Superseded — equivalentCertificate III in Electrical Machine Repair
  4. equivalent
  5. UEE30625CurrentCertificate III in Electrical Machine Repair

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE30607UEE30611equivalent15 March 2012

    The register records this supersession but attaches no note on what changed.

  • UEE30611UEE30620equivalent4 October 2020

    The register records this supersession but attaches no note on what changed.

Is UEE30611 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE30611 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE30611 is made of

training.gov.au lists 41 units for UEE30611: 19 core and 22 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 19 listed

CodeUnitIn this product
UEENEEC018BParticipate in electrical machine repair work and competency development activitiesnot current
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE104ASolve problems in d.c. circuitsnot current
UEENEEE105AFix and secure electrotechnology equipmentnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology worknot current
UEENEEG006ASolve problems in single and three phase low voltage machinesnot current
UEENEEG101ASolve problems in electromagnetic devices and related circuitsnot current
UEENEEG102ASolve problems in low voltage a.c. circuitsnot current
UEENEEG106ATerminate cables, cords and accessories for low voltage circuitsnot current
UEENEEG111ACarry out basic repairs to electrical components and equipmentnot current
UEENEEG150AWind electrical coilsnot current
UEENEEG151APlace and connect electrical coilsnot current
UEENEEG153ARewind three phase low voltage induction machinesnot current
UEENEEG157AConduct electrical tests on LV electrical machinesnot current
UEENEEG164ARepair and maintain mechanical components of electrical machinesnot current
UEENEEK142AApply environmentally and sustainable procedures in the energy sectornot current
UEENEEP015ADisconnect - reconnect motors connected to low voltage installation wiringnot current

Elective units 22 listed

CodeUnitIn this product
CPCCOHS1001AWork safely in the construction industrynot current
HLTAID001Provide cardiopulmonary resuscitationnot current
HLTAID003Provide first aidnot current
HLTAID009Provide cardiopulmonary resuscitationcurrent
HLTAID011Provide First Aidcurrent
UEENEEC001BMaintain documentationnot current
UEENEEC002BSource and purchase material/parts for installation or service jobsnot current
UEENEEC003BProvide quotations for installation or service jobsnot current
UEENEEC010BDeliver a service to customersnot current
UEENEED101AUse computer applications relevant to a workplacenot current
UEENEED104AUse engineering applications software on personal computersnot current
UEENEEE009BComply with scheduled and preventative maintenance program processesnot current
UEENEEE020BProvide basic instruction in the use of electrotechnology apparatusnot current
UEENEEG129AOverhaul and repair major switchgear and controlgearnot current
UEENEEG152ARewind single phase machinesnot current
UEENEEG154ARewind LV direct current machinesnot current
UEENEEG159AConduct mechanical tests on electrical machines and componentsnot current
UEENEEI150ADevelop, enter and verify discrete control programs for programmable controllersnot current
UEENEEJ151AService small electrical appliances and power toolsnot current
UEENEEP020ALocate and rectify faults in low voltage motors using set proceduresnot current
UEENEEP024AAttach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplynot current
UEENEEP025AAttach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supplynot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE30611 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.