When must new enrolments into UET40412 stop?

New enrolments are not permitted from 25 September 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in UET40412?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UET40412 Certificate IV in ESI - Network Systems

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UET40412Superseded — equivalentCertificate IV in ESI - Network Systems
equivalent
UET40419Superseded — equivalentCertificate IV in ESI - Network Systems
equivalent
UET40421Superseded — not equivalentCertificate IV in ESI - Network Systems
not equivalent
UET40422CurrentCertificate IV in ESI - Network Systems

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UET40109UET40412equivalent30 April 2012
The register records this supersession but attaches no note on what changed.
UET40412UET40419equivalent24 September 2019
The register records this supersession but attaches no note on what changed.

Is UET40412 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET40412 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET40412 is made of

training.gov.au lists 86 units for UET40412. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 86 listed

Code	Unit	Core or elective	In this product
AHCARB205A	Operate and maintain chainsaws	`N/A`	not current
BSBINM401A	IMPLEMENT WORKPLACE INFORMATION SYSTEM	`N/A`	not current
BSBMGT402A	Implement operational plan	`N/A`	not current
BSBMGT403A	Implement continuous improvement	`N/A`	not current
BSBWOR401A	Establish effective workplace relationships	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
TLILIC2005A	Licence to operate a boom-type elevating work platform (boom length 11 metres or more)	`N/A`	not current
UEENEEE101A	Apply Occupational Health and Safety regulations, codes and practices in the workplace	`N/A`	not current
UEENEEE102A	Fabricate, assemble and dismantle utilities industry components	`N/A`	not current
UEENEEE104A	Solve problems in d.c. circuits	`N/A`	not current
UEENEEE105A	Fix and secure electrotechnology equipment	`N/A`	not current
UEENEEE107A	Use drawings, diagrams, schedules, standards, codes and specifications	`N/A`	not current
UEENEEG101A	Solve problems in electromagnetic devices and related circuits	`N/A`	not current
UEENEEG102A	Solve problems in low voltage a.c. circuits	`N/A`	not current
UETTDRCJ21A	Lay ESI electrical cables	`N/A`	not current
UETTDRCJ22A	Install and maintain de-energised low voltage underground paper insulated cables	`N/A`	not current
UETTDRCJ23A	Install and maintain de-energised high voltage underground paper insulated cables	`N/A`	not current
UETTDRCJ24A	Joint and maintain energised low voltage underground paper insulated cables	`N/A`	not current
UETTDRCJ25A	Perform straight through high voltage paper insulated to polymeric transition joint	`N/A`	not current
UETTDRCJ26A	Install and maintain de-energised low voltage underground polymeric cables	`N/A`	not current
UETTDRCJ27A	Install and maintain de-energised high voltage underground polymeric cables	`N/A`	not current
UETTDRCJ28A	Joint and maintain energised low voltage underground polymeric cables	`N/A`	not current
UETTDRCJ29A	Install gas and oil filled specialised underground cables	`N/A`	not current
UETTDRCJ30A	Maintain gas and oil filled specialised underground cables	`N/A`	not current
UETTDRCJ31A	Install and maintain polymeric specialised underground cables	`N/A`	not current
UETTDRCJ32A	Install and maintain gas and oil pressure systems for specialised underground cables	`N/A`	not current
UETTDRCJ99A	Test and verify distribution cable jointing installations	`N/A`	not current
UETTDRDP11A	Inspect overhead poles-structures and electrical apparatus	`N/A`	not current

Show the remaining 56 units

Code	Unit	Core or elective	In this product
UETTDRDP12A	Maintain overhead energised low voltage conductors and cables	`N/A`	not current
UETTDRDP13A	Maintain energised HV distribution overhead electrical apparatus (stick)	`N/A`	not current
UETTDRDP14A	Maintain energised HV distribution overhead electrical apparatus (glove)	`N/A`	not current
UETTDRDP99A	Test and verify distribution overhead installations	`N/A`	not current
UETTDRDS31A	Draft and layout a power system overhead distribution extension	`N/A`	not current
UETTDRDS32A	Draft and layout a power system underground distribution extension	`N/A`	not current
UETTDRDS33A	Draft and layout a power system street lighting system	`N/A`	not current
UETTDRDS34A	Draft and layout a power system distribution substation minor upgrade	`N/A`	not current
UETTDREL11A	Apply sustainable energy and environmental procedures	`N/A`	not current
UETTDREL12A	Operate plant and equipment near live electrical conductors and apparatus	`N/A`	not current
UETTDREL16A	Working safely near live electrical apparatus	`N/A`	not current
UETTDRIS41A	Install network infrastructure electrical equipment	`N/A`	not current
UETTDRIS42A	Maintain network infrastructure electrical equipment	`N/A`	not current
UETTDRIS44A	Perform HV field switching operation to a given schedule	`N/A`	not current
UETTDRIS48A	Develop high voltage switching schedule	`N/A`	not current
UETTDRIS49A	Develop low voltage switching schedule	`N/A`	not current
UETTDRIS50A	Coordinate power system permit procedures	`N/A`	not current
UETTDRIS51A	Coordinate and direct power system switching schedules	`N/A`	not current
UETTDRIS52A	Install and maintain poles, structures and associated hardware	`N/A`	not current
UETTDRIS54A	Install and maintain poles, structures and overhead conductors and cables	`N/A`	not current
UETTDRIS55A	Install and maintain low voltage underground services	`N/A`	not current
UETTDRIS56A	Install and maintain low voltage overhead services	`N/A`	not current
UETTDRIS57A	Conduct visual checking and treatment of power system poles and structures	`N/A`	not current
UETTDRIS58A	Locate faults in power system underground power cables	`N/A`	not current
UETTDRIS59A	Conduct high potential testing of power system underground power cables	`N/A`	not current
UETTDRIS60A	Install and replace power system energy meters and associated equipment	`N/A`	not current
UETTDRIS61A	Install mobile generation set for synchronised LV Genset	`N/A`	not current
UETTDRIS62A	Implement and monitor the power system organisational OHS policies, procedures and programs	`N/A`	not current
UETTDRIS63A	Implement and monitor the power system environmental and sustainable energy management policies and procedures	`N/A`	not current
UETTDRIS64A	Install mobile generation set for synchronised HV Genset	`N/A`	not current
UETTDRIS65A	Contribute to coordinated HV live working	`N/A`	not current
UETTDRRT21A	Install traction overhead wiring systems	`N/A`	not current
UETTDRRT22A	Maintain traction overhead wiring systems	`N/A`	not current
UETTDRRT23A	Install rail traction bonds	`N/A`	not current
UETTDRRT24A	Maintain rail traction bonds	`N/A`	not current
UETTDRRT25A	Install overhead rail traction configurations	`N/A`	not current
UETTDRRT26A	Maintain overhead rail traction configurations	`N/A`	not current
UETTDRRT27A	Install overhead traction components and equipment	`N/A`	not current
UETTDRRT28A	Maintain overhead traction components and equipment	`N/A`	not current
UETTDRRT29A	Operate rail road traction height access equipment	`N/A`	not current
UETTDRRT30A	Perform to a given schedule rail traction switching operations	`N/A`	not current
UETTDRRT31A	Maintain energised d.c. traction overhead wiring system	`N/A`	not current
UETTDRRT32A	Maintain energised traction overhead electrical apparatus using stick techniques	`N/A`	not current
UETTDRRT33A	Maintain energised traction overhead electrical apparatus using glove techniques	`N/A`	not current
UETTDRRT99A	Test and verify rail traction installations	`N/A`	not current
UETTDRSB39A	Perform power system substation switching operation to a given schedule	`N/A`	not current
UETTDRTP26A	Install transmission structures and associated hardware	`N/A`	not current
UETTDRTP27A	Maintain transmission structures and associated hardware	`N/A`	not current
UETTDRTP29A	Install and maintain transmission overhead conductors and cables	`N/A`	not current
UETTDRTP30A	Inspect transmission overhead structures and electrical apparatus	`N/A`	not current
UETTDRTP31A	Maintain energised transmission lines using high voltage live work stick method	`N/A`	not current
UETTDRTP32A	Maintain energised transmission lines using high voltage live work Barehand method	`N/A`	not current
UETTDRTP33A	Maintain energised transmission lines using Barehand technique on a helicopter platform	`N/A`	not current
UETTDRTP99A	Test and verify transmission overhead installations	`N/A`	not current
UETTDRVC29A	Control vegetation whilst performing linework	`N/A`	not current
UETTDRVC30A	Coordinate vegetation control operations	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Is UET40412 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.