TLILIC3006A Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLILIC3006A ended on 27 February 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 1 March 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
TLI10 — TRANSPORT AND LOGISTICS TRAINING PACKAGE
Currency period ends
27 February 2016
Latest release
Release 1 · 7 March 2011
Supersedes
TLILIC608A
Superseded by
TLILIC3006 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLILIC3006ASuperseded — equivalentLicence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
  2. equivalent
  3. TLILIC3006Superseded — equivalentLicence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
  4. equivalent
  5. TLILIC0008Superseded — equivalentLicence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
  6. equivalent
  7. TLILIC0018Superseded — not equivalentLicence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
  8. not equivalent
  9. TLILIC0040CurrentLicence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLILIC608ATLILIC3006Aequivalent6 March 2011

    The register records this supersession but attaches no note on what changed.

  • TLILIC3006ATLILIC3006equivalent28 February 2016

    Updated to align with the Standards for Training Packages.

Official documents on the register

What training.gov.au lists for TLILIC3006A and for its training package TLI10 (release 4.2), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is TLILIC3006A on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLILIC3006A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where TLILIC3006A is used

training.gov.au lists TLILIC3006A inside 27 training products, none of them current. Every one of them is below, with the register's own core or elective flag for TLILIC3006A in that product.

Products no longer current 27 listed

The register still records TLILIC3006A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeTLILIC3006A is
CPC40611Certificate IV in Building and Construction (Specialist Trades)Qualificationelective
FDF21012Certificate II in Sugar Milling Industry OperationsQualificationelective
FDF31012Certificate III in Sugar Milling Industry OperationsQualificationelective
MEM20205Certificate II in Engineering - Production TechnologyQualificationelective
MEM30105Certificate III in Engineering - Production SystemsQualificationelective
RII20213Certificate II in Surface Extraction OperationsQualificationelective
RII20215Certificate II in Surface Extraction OperationsQualificationelective
RII20313Certificate II in Underground Coal MiningQualificationelective
RII20315Certificate II in Underground Coal MiningQualificationelective
RII20413Certificate II in Underground Metalliferous MiningQualificationelective
Show the remaining 17 products no longer current
CodeTraining productTypeTLILIC3006A is
RII20415Certificate II in Underground Metalliferous MiningQualificationelective
RII20513Certificate II in Resource ProcessingQualificationelective
RII20515Certificate II in Resource ProcessingQualificationelective
RII30813Certificate III in Civil Construction Plant OperationsQualificationelective
RII30815Certificate III in Civil Construction Plant OperationsQualificationelective
SFI30111Certificate III in AquacultureQualificationelective
SFI30211Certificate III in Fishing OperationsQualificationelective
SFI40211Certificate IV in Fishing OperationsQualificationelective
TLI31510Certificate III in StevedoringQualificationelective
TLI31710Certificate III in Mobile Crane OperationsQualificationelective
TLI33513Certificate III in StevedoringQualificationelective
TLI41910Certificate IV in Mobile Crane OperationsQualificationelective
UEG30114Certificate III in Gas Supply Industry OperationsQualificationelective
UEG30211Certificate III in Gas Supply Industry OperationsQualificationelective
UEG40114Certificate IV in Gas Supply Industry OperationsQualificationelective
UEP20112Certificate II in ESI Generation - Operations SupportQualificationelective
UEP40312Certificate IV in ESI Generation Maintenance (Mechanical)Qualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is TLILIC3006A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.