UEP20112 Certificate II in ESI Generation - Operations Support

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEP20112 ended on 29 October 2018 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 31 October 2019. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEP12 — Electricity Supply Industry - Generation Sector Training Package
Currency period ends
29 October 2018
Latest release
Release 3 · 7 September 2013 · 3 releases in all
Supersedes
UEP20110
Superseded by
UEP20118 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEP20112Superseded — equivalentCertificate II in ESI Generation - Operations Support
  2. equivalent
  3. UEP20118Superseded — equivalentCertificate II in ESI Generation - Operations Support
  4. equivalent
  5. UEP20122CurrentCertificate II in ESI Generation - Operations Support

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEP20110UEP20112equivalent24 July 2012

    The register records this supersession but attaches no note on what changed.

  • UEP20112UEP20118equivalent30 October 2018

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEP20112 and for its training package UEP12 (release 2.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • UEP20112_R3.docxUEP20112 release 3 · product document · published 26 November 2024
  • UEP20112_R3.pdfUEP20112 release 3 · product document · published 7 September 2013

Is UEP20112 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEP20112 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEP20112 is made of

training.gov.au lists 47 units for UEP20112: 6 core and 41 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEPOPS202BApply quality systems to worknot current
UEPOPS204BMaintain and utilise recordsnot current
UEPOPS209BPerform process plant inspectionsnot current
UEPOPS252AUndertake local systems operationsnot current
UEPOPS356BApply environmental and sustainable energy proceduresnot current

Elective units 41 listed

CodeUnitIn this product
CPCCCM2007BUse explosive power toolsnot current
CPCCLDG3001ALicence to perform doggingnot current
CPCCLHS3001ALicence to operate a personnel and materials hoistnot current
CPCCLHS3002ALicence to operate a materials hoistnot current
CPCCLRG3001ALicence to perform rigging basic levelnot current
CPCCLRG3002ALicence to perform rigging intermediate levelnot current
CPCCLSF2001ALicence to erect, alter and dismantle scaffolding basic levelnot current
CPCCLSF3001ALicence to erect, alter and dismantle scaffolding intermediate levelnot current
MEM05004CPerform routine oxy acetylene weldingnot current
MEM05007CPerform manual heating and thermal cuttingnot current
MEM05012CPerform routine manual metal arc weldingnot current
RIIMPO304BConduct wheel loader operationsnot current
RIIMPO308BConduct tracked dozer operationsnot current
RIIMPO309AConduct wheeled dozer operationsnot current
RIIMPO319AConduct backhoe/loader operationsnot current
TLILIC0012ALicence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC2001ALicence to operate a forklift trucknot current
TLILIC2005ALicence to operate a boom-type elevating work platform (boom length 11 metres or more)not current
TLILIC3006ALicence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)not current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEPMNT201ACarry out routine work activities in an electricity supply industry generation environmentnot current
UEPOPS203BOperate and monitor communications systemnot current
UEPOPS205BConduct minor mechanical maintenancenot current
UEPOPS206BConduct minor electrical maintenancenot current
UEPOPS207BPerform plant lubricationnot current
UEPOPS210BConduct first response within a workplace teamnot current
UEPOPS211BClean plant and equipmentnot current
UEPOPS232BTransport plant and equipmentnot current
UEPOPS237BPerform tool store dutiesnot current
UEPOPS238BMaintain battery banks and cellsnot current
Show the remaining 11 elective units
CodeUnitIn this product
UEPOPS240BOperate and monitor fuel supply (coal)not current
UEPOPS241BOperate and monitor ash and dust disposal plantnot current
UEPOPS242BOperate and monitor dust collection plantnot current
UEPOPS243BOperate air conditioning plantnot current
UEPOPS244BOperate and monitor site services water systemsnot current
UEPOPS245BConduct chemical batching operationsnot current
UEPOPS246BOperate waste and contaminated water plantnot current
UEPOPS247BOperate and monitor an internal combustion single fuel reciprocating enginenot current
UEPOPS248BOperate and monitor an internal combustion dual fuel reciprocating enginenot current
UEPOPS249BLiaise with stakeholdersnot current
UEPOPS251AConduct routine wind turbine maintenancenot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEP20112 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.