Can an RTO still enrol new students in UEP20110?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 25 July 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in UEP20110?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEP20110 Certificate II in ESI Generation (Operations Support)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEP20110Superseded — equivalentCertificate II in ESI Generation (Operations Support)
equivalent
UEP20112Superseded — equivalentCertificate II in ESI Generation - Operations Support
equivalent
UEP20118Superseded — equivalentCertificate II in ESI Generation - Operations Support
equivalent
UEP20122CurrentCertificate II in ESI Generation - Operations Support

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEP20106UEP20110equivalent8 November 2006
The register records this supersession but attaches no note on what changed.
UEP20110UEP20112equivalent24 July 2012
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEP20110 and for its training package UEP06 (release 1.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

UEP20110_R1.docxUEP20110 release 1 · product document · published 26 November 2024
UEP20110_R1.pdfUEP20110 release 1 · product document · published 20 July 2012

Is UEP20110 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEP20110 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEP20110 is made of

training.gov.au lists 43 units for UEP20110. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 43 listed

Code	Unit	Core or elective	In this product
MEM05004C	Perform routine oxy acetylene welding	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
TLILIC108A	Licence to operate a forklift truck	`N/A`	not current
UEPOPS201A	Comply with Occupational Health and Safety Policy and Procedures	`N/A`	not current
UEPOPS202A	Apply Quality Systems to Work	`N/A`	not current
UEPOPS203A	Operate and Monitor Communications System	`N/A`	not current
UEPOPS204A	Maintain and Utilise Records	`N/A`	not current
UEPOPS205A	Conduct Minor Mechanical Maintenance	`N/A`	not current
UEPOPS206A	Conduct Minor/Basic Electrical Maintenance	`N/A`	not current
UEPOPS207A	Perform Plant Lubrication	`N/A`	not current
UEPOPS208A	Operate Local Systems	`N/A`	not current
UEPOPS209A	Perform Process Plant Inspections	`N/A`	not current
UEPOPS210A	Conduct First Response within a Workplace Team	`N/A`	not current
UEPOPS211A	Clean Plant and Equipment	`N/A`	not current
UEPOPS212A	Perform Basic Rigging Work	`N/A`	not current
UEPOPS213A	Perform Intermediate Rigging Work	`N/A`	not current
UEPOPS214A	Perform Dogging Work	`N/A`	not current
UEPOPS215A	Perform Basic Scaffolding	`N/A`	not current
UEPOPS216A	Perform Intermediate Scaffolding	`N/A`	not current
UEPOPS217A	Conduct Elevating Work Platform Operations	`N/A`	not current
UEPOPS223A	Shift and Transfer Materials using a Telescopic Materials Handler-Loader	`N/A`	not current
UEPOPS226A	Shift and Transfer Materials using Bobcats - Wheeled and Tracked	`N/A`	not current
UEPOPS227A	Shift and Transfer Materials using Borers and related attachments	`N/A`	not current
UEPOPS229A	Operate Lifting and Load Shifting Equipment for Loads less than 10 tonnes	`N/A`	not current
UEPOPS230A	Operate Lifting and Load Shifting Equipment for Loads greater than ten tonnes	`N/A`	not current
UEPOPS231A	Operate Explosive Powered Tool	`N/A`	not current
UEPOPS232A	Transport Plant and Equipment	`N/A`	not current
UEPOPS237A	Perform Tool Store Duties	`N/A`	not current
UEPOPS238A	Maintain Battery Banks and Cells	`N/A`	not current

Show the remaining 13 units

Code	Unit	Core or elective	In this product
UEPOPS239A	Conduct Minor/Basic Electrical Maintenance	`N/A`	not current
UEPOPS240A	Operate and Monitor Fuel Supply (Coal)	`N/A`	not current
UEPOPS241A	Operate and Monitor Ash and Dust Disposal Plant	`N/A`	not current
UEPOPS242A	Operate and Monitor Dust Collection Plant	`N/A`	not current
UEPOPS243A	Operate Air Conditioning Plant	`N/A`	not current
UEPOPS244A	Operate and Monitor Site Services Water Systems	`N/A`	not current
UEPOPS245A	Conduct Chemical Batching Operations	`N/A`	not current
UEPOPS246A	Operate Waste and Contaminated Water Plant	`N/A`	not current
UEPOPS247A	Operate and Monitor an Internal Combustion Single Fuel Reciprocating Engine	`N/A`	not current
UEPOPS248A	Operate and Monitor an Internal Combustion Dual Fuel Reciprocating Engine	`N/A`	not current
UEPOPS249A	Liaise with Stakeholders	`N/A`	not current
UEPOPS250A	Perform Process Plant Inspections	`N/A`	not current
UEPOPS356A	Apply Environmental and Sustainable Energy Procedures	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEP20110 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.