When must new enrolments into FDF21012 stop?

New enrolments are not permitted from 18 December 2019 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in FDF21012?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

FDF21012 Certificate II in Sugar Milling Industry Operations

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

FDF21012Superseded — equivalentCertificate II in Sugar Milling Industry Operations
equivalent
FBP20618Deleted from the registerCertificate II in Sugar Milling Support

The register does not list a current endpoint for this chain: FBP20618 is the last product it points at, and FBP20618 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

SUG20102FDF21012not equivalent30 April 2012
New Qualification based on SUG20102 Certificate II in Sugar Milling. Non-equivalent – vocational outcome is equivalent but Packaging Rules differ.
FDF21012FBP20618equivalent17 December 2018
Updated to meet the Standards for Training Packages. Title change to better reflect job outcomes. Changes to core and electives. Imported units updated in core and elective list.

Is FDF21012 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FDF21012 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FDF21012 is made of

training.gov.au lists 53 units for FDF21012. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 53 listed

Code	Unit	Core or elective	In this product
AHCMOM203A	Operate basic machinery and equipment	`N/A`	not current
AHCMOM204A	Undertake operational maintenance of machinery	`N/A`	not current
AHCMOM207A	Conduct front-end loader operations	`N/A`	not current
CPCCDO3011A	Perform dogging	`N/A`	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	`N/A`	not current
CPCCRI3012A	Perform basic rigging	`N/A`	not current
CPCCSC2002A	Erect and dismantle basic scaffolding	`N/A`	not current
FDFOHS2001A	Participate in OHS processes	`N/A`	not current
FDFOP2030A	Operate a process control interface	`N/A`	not current
FDFOP2034A	Operate an evaporation process	`N/A`	not current
FDFOP2064A	Provide and apply workplace information	`N/A`	not current
FDFSUG201A	Lay sleepers for cane rail systems	`N/A`	not current
FDFSUG202A	Lay rails for cane rail systems	`N/A`	not current
FDFSUG203A	Lay skeleton track for cane rail system	`N/A`	not current
FDFSUG204A	Operate tamping equipment	`N/A`	not current
FDFSUG205A	Construct turnouts	`N/A`	not current
FDFSUG206A	Drive a cane locomotive	`N/A`	not current
FDFSUG207A	Conduct cane weighbridge operations	`N/A`	not current
FDFSUG208A	Operate a tipping station	`N/A`	not current
FDFSUG209A	Operate an extraction station	`N/A`	not current
FDFSUG210A	Operate a juice clarification process	`N/A`	not current
FDFSUG211A	Operate a mud filtration process	`N/A`	not current
FDFSUG212A	Chemically clean equipment	`N/A`	not current
FDFSUG213A	Operate a pans station	`N/A`	not current
FDFSUG214A	Operate a low grade fugal station	`N/A`	not current
FDFSUG215A	Operate a high grade fugal station	`N/A`	not current
FDFSUG216A	Operate a crystalliser station process	`N/A`	not current
FDFSUG217A	Operate a turbine	`N/A`	not current
FDFSUG218A	Operate a boiler - basic	`N/A`	not current
FDFSUG219A	Operate a bagasse fuel supply system	`N/A`	not current

Show the remaining 23 units

Code	Unit	Core or elective	In this product
FDFSUG220A	Operate a coal fuel supply system	`N/A`	not current
FDFSUG221A	Operate an ash separation system	`N/A`	not current
FDFSUG222A	Operate a waste water treatment system	`N/A`	not current
FDFSUG223A	Operate a cooling water system	`N/A`	not current
FDFSUG224A	Perform standard tests on cane samples	`N/A`	not current
FDFSUG225A	Collect and prepare samples	`N/A`	not current
FDFSUG226A	Perform general drilling operations	`N/A`	not current
FDFSUG227A	Perform general lathe operations	`N/A`	not current
FDFSUG228A	Perform general milling operations	`N/A`	not current
FDFSUG229A	Perform general planing and shaping operations	`N/A`	not current
FDFSUG230A	Undertake forming, bending and shaping	`N/A`	not current
FDFSUG231A	Undertake simple fabrication	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
RIICBM305A	Install pre-cast concrete bridge decks	`N/A`	not current
RIIHAN305A	Operate a gantry or overhead crane	`N/A`	not current
RIIMPO319A	Conduct backhoe/loader operations	`N/A`	not current
TLIC2041A	Operate self-propelled equipment on track	`N/A`	not current
TLID3035A	Operate a boom type elevating work platform	`N/A`	not current
TLID3036A	Lift and move load using a mobile crane	`N/A`	not current
TLILIC2001A	Licence to operate a forklift truck	`N/A`	not current
TLILIC2014A	Licence to drive light rigid vehicle	`N/A`	not current
TLILIC2015A	Licence to drive medium rigid vehicle	`N/A`	not current
TLILIC3006A	Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FDF training product on the register · Search all training products

Is FDF21012 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.