Can an RTO still enrol new students in RII20712?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 14 November 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in RII20712?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

RII20712 Certificate II in Civil Construction

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

RII20712Superseded — not equivalentCertificate II in Civil Construction
not equivalent
RII20713Superseded — equivalentCertificate II in Civil Construction
equivalent
RII20715Superseded — equivalentCertificate II in Civil Construction
equivalent
RII20720CurrentCertificate II in Civil Construction

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

RII20709RII20712equivalent20 March 2012
The register records this supersession but attaches no note on what changed.
RII20712RII20713not equivalent13 November 2013
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for RII20712 and for its training package RII09 (release 3.2), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

RII20712_R2.docxRII20712 release 2 · product document · published 26 November 2024
RII20712_R2.pdfRII20712 release 2 · product document · published 30 May 2013
RII09 User Guide - SUPERSEDEDCompanion Volume Supporting Material · RII09 release 3.2 · DOC · 1 March 2016

Is RII20712 on your scope?

This page is the register's record of one product. What it cannot tell you is whether RII20712 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What RII20712 is made of

training.gov.au lists 33 units for RII20712. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 33 listed

Code	Unit	Core or elective	In this product
CPCCCM2007A	Use explosive power tools	`N/A`	not current
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
CPCCLSF2001A	Licence to erect, alter and dismantle scaffolding basic level	`N/A`	not current
FPICOT2221B	Trim and cross cut felled trees	`N/A`	not current
FPIFGM3204A	Fall trees manually (intermediate)	`N/A`	not current
RIIBEF201B	Plan and organise work	`N/A`	not current
RIICBS202A	Hand spread asphalt	`N/A`	not current
RIICCM201A	Carry out measurements and calculations	`N/A`	not current
RIICCM202A	Identify, locate and protect underground services	`N/A`	not current
RIICCM203A	Read and interpret plans and specifications	`N/A`	not current
RIICCM205A	Carry out manual excavation	`N/A`	not current
RIICCM206A	Support plant operations	`N/A`	not current
RIICCM207A	Spread and compact materials manually	`N/A`	not current
RIICCM208A	Carry out basic levelling	`N/A`	not current
RIICCM209A	Carry out concrete work	`N/A`	not current
RIICCM210A	Install trench support	`N/A`	not current
RIICCM211A	Erect and dismantle temporary fencing and gates	`N/A`	not current
RIICFW306A	Direct pile driving operations	`N/A`	not current
RIICFW307A	Direct cast in-situ piling operations	`N/A`	not current
RIICOM201A	Communicate in the workplace	`N/A`	not current
RIICRC201A	Repair potholes	`N/A`	not current
RIICRC208A	Lay pipes	`N/A`	not current
RIIHAN211A	Conduct basic scaffolding operations	`N/A`	not current
RIIHAN301B	Operate elevating work platform	`N/A`	not current
RIIOHS201A	Work safely and follow OHS policies and procedures	`N/A`	not current
RIIOHS202A	Enter and work in confined spaces	`N/A`	not current
RIIOHS205A	Control traffic with stop-slow bat	`N/A`	not current
RIISAM201A	Handle resources and infrastructure materials and safely dispose of non toxic materials	`N/A`	not current
RIISAM203B	Use hand and power tools	`N/A`	not current

Show the remaining 3 units

Code	Unit	Core or elective	In this product
RIISAM204B	Operate small plant and equipment	`N/A`	not current
RIISAM205A	Cut, weld and bend materials	`N/A`	not current
RIIWMG203A	Drain and dewater civil construction site	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every RII training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is RII20712 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.