CPCCCM2007A Use explosive power tools

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPCCCM2007A ended on 5 February 2013 — 13 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 7 February 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
5 February 2013
Latest release
Release 1 · 7 March 2011
Supersedes
nothing — no earlier product listed
Superseded by
CPCCCM2007B equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPCCCM2007ASuperseded — equivalentUse explosive power tools
  2. equivalent
  3. CPCCCM2007BSuperseded — equivalentUse explosive power tools
  4. equivalent
  5. CPCCCM2007CurrentUse explosive power tools

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPCCCM2007ACPCCCM2007Bequivalent6 February 2013

    Minor changes made to range statement, including addition of photovoltaic (solar) panels. Equivalent to CPCCCM2007A

Official documents on the register

What training.gov.au lists for CPCCCM2007A and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is CPCCCM2007A on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPCCCM2007A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where CPCCCM2007A is used

training.gov.au lists CPCCCM2007A inside 39 training products, none of them current. Every one of them is below, with the register's own core or elective flag for CPCCCM2007A in that product.

Products no longer current 39 listed

The register still records CPCCCM2007A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeCPCCCM2007A is
CPC20111Certificate II in ConstructionQualificationelective
CPC30111Certificate III in Bricklaying/BlocklayingQualificationelective
CPC30211Certificate III in CarpentryQualificationelective
CPC30311Certificate III in ConcretingQualificationelective
CPC30411Certificate III in DemolitionQualificationelective
CPC30511Certificate III in DoggingQualificationelective
CPC30711Certificate III in RiggingQualificationelective
CPC30811Certificate III in Roof TilingQualificationelective
CPC30911Certificate III in ScaffoldingQualificationelective
CPC31011Certificate III in Solid PlasteringQualificationelective
Show the remaining 29 products no longer current
CodeTraining productTypeCPCCCM2007A is
CPC31211Certificate III in Wall and Ceiling LiningQualificationelective
CPC31411Certificate III in Construction WaterproofingQualificationelective
CPC31511Certificate III in Formwork/FalseworkQualificationelective
CPC31711Certificate III in Low Rise Structural FramingQualificationelective
CPC31811Certificate III in ShopfittingQualificationelective
CPC31911Certificate III in JoineryQualificationelective
CPC32011Certificate III in Carpentry and JoineryQualificationelective
CPC32211Certificate III in Joinery (Stairs)Qualificationelective
CPC32311Certificate III in Stonemasonry (Monumental/Installation)Qualificationelective
DEF33112Certificate III in Military Land EngineeringQualificationelective
RII20709Certificate II in Civil ConstructionQualificationelective
RII20712Certificate II in Civil ConstructionQualificationelective
RII20713Certificate II in Civil ConstructionQualificationelective
RII30809Certificate III in Civil Construction Plant OperationsQualificationelective
RII30909Certificate III in Civil ConstructionQualificationelective
RII30912Certificate III in Civil ConstructionQualificationelective
RII30913Certificate III in Civil ConstructionQualificationelective
RII31109Certificate III in Bridge Construction and MaintenanceQualificationelective
RII31309Certificate III in Pipe LayingQualificationelective
RII31409Certificate III in Road Construction and MaintenanceQualificationelective
RII31709Certificate III in Tunnel ConstructionQualificationelective
TLI21310Certificate II in Rail InfrastructureQualificationelective
TLI21311Certificate II in Rail InfrastructureQualificationelective
UEP20112Certificate II in ESI Generation - Operations SupportQualificationelective
UEP30112Certificate III in ESI Generation - Systems OperationsQualificationelective
UEP30212Certificate III in ESI Generation - OperationsQualificationelective
UEP40312Certificate IV in ESI Generation Maintenance (Mechanical)Qualificationelective
UEP40412Certificate IV in ESI Generation Maintenance (Fabrication)Qualificationelective
UET20511Certificate II in National Broadband Network Cabling (Electricity Supply Industry Assets)Qualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPCCCM2007A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.