Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for CPC32211 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is CPC32211 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC32211 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC32211 is made of
training.gov.au lists 36 units for CPC32211: 10 core and 2 elective, and 24 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 10 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCA2002B | Use carpentry tools and equipment | !not current |
| CPCCCA2011A | Handle carpentry materials | !not current |
| CPCCCA3023A | Carry out levelling operations | !not current |
| CPCCCM1012A | Work effectively and sustainably in the construction industry | !not current |
| CPCCCM1013A | Plan and organise work | !not current |
| CPCCCM1014A | Conduct workplace communication | !not current |
| CPCCCM1015A | Carry out measurements and calculations | !not current |
| CPCCCM2001A | Read and interpret plans and specifications | !not current |
| CPCCCM2010B | Work safely at heights | !not current |
| CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | !not current |
Elective units 2 listed
Units the register marks neither core nor elective 24 listed
| Code | Unit | Core or elective | In this product |
|---|---|---|---|
| CPCCCA3013A | Install lining, panelling and moulding | N/A | !not current |
| CPCCCA3015A | Assemble partitions | N/A | !not current |
| CPCCCA3016A | Construct timber external stairs | N/A | !not current |
| CPCCCM2007B | Use explosive power tools | N/A | !not current |
| CPCCCO2013A | Carry out concreting to simple forms | N/A | !not current |
| CPCCJN2001A | Assemble components | N/A | !not current |
| CPCCJN2003A | Package manufactured products for transport | N/A | !not current |
| CPCCJN3001A | Use static machines | N/A | !not current |
| CPCCJN3002A | Use computer-controlled machinery | N/A | !not current |
| CPCCJN3005A | Cut and install glass | N/A | !not current |
| CPCCJS3002A | Manufacture stair components for straight flighted stairs | N/A | !not current |
| CPCCJS3003A | Assemble and install stairs | N/A | !not current |
| CPCCJS3004A | Manufacture and install continuous handrailing and special stair components | N/A | !not current |
| CPCCJS3005A | Manufacture stair components for curved and geometric stairs | N/A | !not current |
| CPCCJS3006A | Construct fabricated stairs | N/A | !not current |
| CPCCJS3011A | Design and set out stairs | N/A | !not current |
| CPCCPD3021A | Prepare surfaces for painting | N/A | !not current |
| CPCCPD3022A | Apply paint by brush and roller | N/A | !not current |
| CPCCPD3024A | Apply paint by spray | N/A | !not current |
| CPCCSH2002A | Use aluminium sections for fabrication | N/A | !not current |
| CPCCSH2003A | Apply and install sealant and sealant devices | N/A | !not current |
| CPCCSH3005A | Apply and trim decorative finishes | N/A | !not current |
| CPCCSH3006A | Apply finishes | N/A | !not current |
| CPCCST2005A | Carry out load slinging of off-site materials | N/A | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is CPC32211 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.