CPCCCM1013A Plan and organise work

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPCCCM1013A ended on 15 January 2019 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 17 January 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
15 January 2019
Latest release
Release 1 · 19 May 2011
Supersedes
CPCCCM1003A
Superseded by
CPCCCM1013 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPCCCM1013ASuperseded — equivalentPlan and organise work
  2. equivalent
  3. CPCCCM1013Superseded — equivalentPlan and organise work
  4. equivalent
  5. CPCCOM1013CurrentPlan and organise work

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPCCCM1003ACPCCCM1013Anot equivalent18 May 2011

    Prerequisite unit CPCCOHS2001A removed Unit outcome altered Not equivalent to CPCCCM1003A

  • CPCCCM1013ACPCCCM1013equivalent16 January 2019

    The register records this supersession but attaches no note on what changed.

Is CPCCCM1013A on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPCCCM1013A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where CPCCCM1013A is used

training.gov.au lists CPCCCM1013A inside 41 training products, none of them current. Every one of them is below, with the register's own core or elective flag for CPCCCM1013A in that product.

Products no longer current 41 listed

The register still records CPCCCM1013A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeCPCCCM1013A is
CPC10111Certificate I in ConstructionQualificationcore
CPC20111Certificate II in ConstructionQualificationelective
CPC20112Certificate II in ConstructionQualificationcore
CPC20211Certificate II in Construction PathwaysQualificationcore
CPC20311Certificate II in SteelfixingQualificationelective
CPC20411Certificate II in ConcretingQualificationelective
CPC20511Certificate II in StoneworkingQualificationelective
CPC30111Certificate III in Bricklaying/BlocklayingQualificationcore
CPC30211Certificate III in CarpentryQualificationcore
CPC30311Certificate III in ConcretingQualificationcore
Show the remaining 31 products no longer current
CodeTraining productTypeCPCCCM1013A is
CPC30313Certificate III in ConcretingQualificationcore
CPC30411Certificate III in DemolitionQualificationcore
CPC30511Certificate III in DoggingQualificationcore
CPC30611Certificate III in Painting and DecoratingQualificationcore
CPC30711Certificate III in RiggingQualificationcore
CPC30811Certificate III in Roof TilingQualificationelective
CPC30812Certificate III in Roof TilingQualificationcore
CPC30911Certificate III in ScaffoldingQualificationcore
CPC31011Certificate III in Solid PlasteringQualificationcore
CPC31111Certificate III in SteelfixingQualificationcore
CPC31211Certificate III in Wall and Ceiling LiningQualificationcore
CPC31311Certificate III in Wall and Floor TilingQualificationcore
CPC31411Certificate III in Construction WaterproofingQualificationcore
CPC31511Certificate III in Formwork/FalseworkQualificationcore
CPC31611Certificate III in PavingQualificationcore
CPC31711Certificate III in Low Rise Structural FramingQualificationelective
CPC31811Certificate III in ShopfittingQualificationelective
CPC31812Certificate III in ShopfittingQualificationcore
CPC31911Certificate III in JoineryQualificationelective
CPC31912Certificate III in JoineryQualificationcore
CPC32011Certificate III in Carpentry and JoineryQualificationcore
CPC32111Certificate III in SignageQualificationcore
CPC32211Certificate III in Joinery (Stairs)Qualificationcore
CPC32311Certificate III in Stonemasonry (Monumental/Installation)Qualificationcore
CPC32313Certificate III in Stonemasonry (Monumental/Installation)Qualificationcore
CPC32912Certificate III in Construction Crane OperationsQualificationcore
CUA30413Certificate III in Live Production and ServicesQualificationelective
CUA30415Certificate III in Live Production and ServicesQualificationelective
CUA40413Certificate IV in Live Production and Technical ServicesQualificationelective
CUA40415Certificate IV in Live Production and Technical ServicesQualificationelective
DEF33112Certificate III in Military Land EngineeringQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Is CPCCCM1013A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.