When must new enrolments into CPC30711 stop?

New enrolments are not permitted from 27 November 2021 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in CPC30711?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC30711 Certificate III in Rigging — superseded, equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC30711Superseded — equivalentCertificate III in Rigging
equivalent
CPC30720CurrentCertificate III in Rigging

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC30708CPC30711not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC30711CPC30720equivalent26 November 2020
The register records this supersession but attaches no note on what changed.

Is CPC30711 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC30711 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC30711 is made of

training.gov.au lists 28 units for CPC30711: 10 core and 3 elective, and 15 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 10 listed

Code	Unit	In this product
CPCCCM1012A	Work effectively and sustainably in the construction industry	not current
CPCCCM1013A	Plan and organise work	not current
CPCCCM1014A	Conduct workplace communication	not current
CPCCCM1015A	Carry out measurements and calculations	not current
CPCCCM2001A	Read and interpret plans and specifications	not current
CPCCCM2010B	Work safely at heights	not current
CPCCCM3001C	Operate elevated work platforms	not current
CPCCCM3003A	Work safely around power sources, services and assets	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	not current
RIIWHS302D	Implement traffic management plan	not current

Elective units 3 listed

Code	Unit	In this product
BSBSMB301	Investigate micro business opportunities	not current
BSBSMB406	Manage small business finances	not current
TLILIC0003	Licence to operate a forklift truck	current

Units the register marks neither core nor elective 15 listed

Code	Unit	Core or elective	In this product
CPCCCM2007B	Use explosive power tools	`N/A`	not current
CPCCCM3002A	Operate a truck mounted loading crane	`N/A`	not current
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLHS3001A	Licence to operate a personnel and materials hoist	`N/A`	not current
CPCCLHS3002A	Licence to operate a materials hoist	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
CPCCLRG3002A	Licence to perform rigging intermediate level	`N/A`	not current
CPCCRI3001A	Operate personnel and materials hoists	`N/A`	not current
CPCCRI3012A	Perform basic rigging	`N/A`	not current
CPCCRI3013A	Perform intermediate rigging	`N/A`	not current
CPCCRI3014A	Perform advanced structural steel erection	`N/A`	not current
CPCCRI3015A	Perform advanced tilt-up slab erection	`N/A`	not current
CPCCRI3016A	Perform advanced tower crane erection	`N/A`	not current
CPCCSC2002A	Erect and dismantle basic scaffolding	`N/A`	not current
CPCCSF2003A	Cut and bend materials using oxy-LPG equipment	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Is CPC30711 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.