CPCCSF2003A Cut and bend materials using oxy-LPG equipment

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPCCSF2003A ended on 15 January 2019 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 17 January 2020. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
15 January 2019
Latest release
Release 1 · 12 November 2010
Supersedes
nothing — no earlier product listed
Superseded by
CPCCSF2003 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPCCSF2003ASuperseded — equivalentCut and bend materials using oxy-LPG equipment
  2. equivalent
  3. CPCCSF2003CurrentCut and bend materials using oxy-LPG equipment

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPCCSF2003ACPCCSF2003equivalent16 January 2019

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPCCSF2003A and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is CPCCSF2003A on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPCCSF2003A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where CPCCSF2003A is used

training.gov.au lists CPCCSF2003A inside 33 training products, none of them current. Every one of them is below, with the register's own core or elective flag for CPCCSF2003A in that product.

Products no longer current 33 listed

The register still records CPCCSF2003A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeCPCCSF2003A is
CPC30211Certificate III in CarpentryQualificationelective
CPC30311Certificate III in ConcretingQualificationelective
CPC30313Certificate III in ConcretingQualificationelective
CPC30411Certificate III in DemolitionQualificationelective
CPC30413Certificate III in DemolitionQualificationelective
CPC30711Certificate III in RiggingQualificationelective
CPC30911Certificate III in ScaffoldingQualificationelective
CPC31111Certificate III in SteelfixingQualificationelective
CPC31511Certificate III in Formwork/FalseworkQualificationelective
CPC31711Certificate III in Low Rise Structural FramingQualificationelective
Show the remaining 23 products no longer current
CodeTraining productTypeCPCCSF2003A is
CPC31811Certificate III in ShopfittingQualificationelective
CPC31812Certificate III in ShopfittingQualificationelective
CPC31911Certificate III in JoineryQualificationelective
CPC31912Certificate III in JoineryQualificationelective
CPC32011Certificate III in Carpentry and JoineryQualificationelective
CUA30413Certificate III in Live Production and ServicesQualificationelective
CUA30415Certificate III in Live Production and ServicesQualificationelective
CUE20103Certificate II in Live Production, Theatre and EventsQualificationelective
CUE50303Diploma of Live Production, Theatre and Events (Technical Production)Qualificationelective
DEF32912Certificate III in Vehicle RecoveryQualificationelective
DEF33112Certificate III in Military Land EngineeringQualificationelective
PUA32909Certificate III in Public Safety (Vehicle Recovery)Qualificationelective
TLI21310Certificate II in Rail InfrastructureQualificationelective
TLI31910Certificate III in Mechanical Rail SignallingQualificationelective
TLI32110Certificate III in Rail StructuresQualificationelective
TLI32510Certificate III in Rail InfrastructureQualificationelective
TLI42111Certificate IV in Driving OperationsQualificationelective
TLI42116Certificate IV in Driving OperationsQualificationelective
TLISS00003Aluminothermic Welding Skill SetSkill setelective
TLISS00018Installing Transoms Skill SetSkill setelective
TLISS00043Repairing Concrete/Masonry Structures Skill SetSkill setelective
TLISS00044Repairing Steel Structures Skill SetSkill setelective
TLISS00045Repairing Timber Structures Skill SetSkill setelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPCCSF2003A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.