Can an RTO still enrol new students in CPC30211?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPC30211?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC30211 Certificate III in Carpentry

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC30211Superseded — equivalentCertificate III in Carpentry
equivalent
CPC30220Superseded — equivalentCertificate III in Carpentry
equivalent
CPC30326CurrentCertificate III in Carpentry

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC30208CPC30211not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC30211CPC30220equivalent26 November 2020
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPC30211 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPC30211_R4.pdfCPC30211 release 4 · product document · published 11 November 2021
CPC30211_R4.docxCPC30211 release 4 · product document · published 26 November 2024

Is CPC30211 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC30211 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC30211 is made of

training.gov.au lists 45 units for CPC30211: 16 core and 5 elective, and 24 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 16 listed

Code	Unit	In this product
CPCCCA2002B	Use carpentry tools and equipment	not current
CPCCCA2011A	Handle carpentry materials	not current
CPCCCA3001A	Carry out general demolition of minor building structures	not current
CPCCCA3002A	Carry out setting out	not current
CPCCCA3023A	Carry out levelling operations	not current
CPCCCM1012A	Work effectively and sustainably in the construction industry	not current
CPCCCM1013A	Plan and organise work	not current
CPCCCM1014A	Conduct workplace communication	not current
CPCCCM1015A	Carry out measurements and calculations	not current
CPCCCM2001A	Read and interpret plans and specifications	not current
CPCCCM2002A	Carry out excavation	not current
CPCCCM2007B	Use explosive power tools	not current
CPCCCM2008B	Erect and dismantle restricted height scaffolding	not current
CPCCCM2010B	Work safely at heights	not current
CPCCCO2013A	Carry out concreting to simple forms	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	not current

Elective units 5 listed

Code	Unit	In this product
BSBSMB301	Investigate micro business opportunities	not current
BSBSMB406	Manage small business finances	not current
RIICCM210D	Install trench support	not current
RIIWHS202D	Enter and work in confined spaces	not current
RIIWMG203D	Drain and dewater civil construction site	not current

Units the register marks neither core nor elective 24 listed

Code	Unit	Core or elective	In this product
CPCCCA2003A	Erect and dismantle formwork for footings and slabs on ground	`N/A`	not current
CPCCCA3003A	Install flooring systems	`N/A`	not current
CPCCCA3004A	Construct wall frames	`N/A`	not current
CPCCCA3005B	Construct ceiling frames	`N/A`	not current
CPCCCA3006B	Erect roof trusses	`N/A`	not current
CPCCCA3007C	Construct pitched roofs	`N/A`	not current
CPCCCA3008B	Construct eaves	`N/A`	not current
CPCCCA3009B	Construct advanced roofs	`N/A`	not current
CPCCCA3010A	Install and replace windows and doors	`N/A`	not current
CPCCCA3011A	Refurbish timber sashes to window frames	`N/A`	not current
CPCCCA3012A	Frame and fit wet area fixtures	`N/A`	not current
CPCCCA3013A	Install lining, panelling and moulding	`N/A`	not current
CPCCCA3014A	Construct bulkheads	`N/A`	not current
CPCCCA3015A	Assemble partitions	`N/A`	not current
CPCCCA3016A	Construct timber external stairs	`N/A`	not current
CPCCCA3017B	Install exterior cladding	`N/A`	not current
CPCCCA3018A	Construct, erect and dismantle formwork for stairs and ramps	`N/A`	not current
CPCCCA3019A	Erect and dismantle formwork to suspended slabs, columns, beams and walls	`N/A`	not current
CPCCCA3020A	Erect and dismantle jump form formwork	`N/A`	not current
CPCCCA3022A	Install curtain walling	`N/A`	not current
CPCCCM3001C	Operate elevated work platforms	`N/A`	not current
CPCCSF2003A	Cut and bend materials using oxy-LPG equipment	`N/A`	not current
CPCCSF2004A	Place and fix reinforcement materials	`N/A`	not current
CPCCWC3003A	Install dry wall passive fire-rated systems	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC30211 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.