CPCCCO2013A Carry out concreting to simple forms

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPCCCO2013A ended on 25 November 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
25 November 2020
Latest release
Release 1 · 19 May 2011
Supersedes
CPCCCO2003A
Superseded by
CPCCCO2013 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPCCCO2013ASuperseded — equivalentCarry out concreting to simple forms
  2. equivalent
  3. CPCCCO2013CurrentCarry out concreting to simple forms

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPCCCO2003ACPCCCO2013Anot equivalent17 July 2011

    Prerequisite requirement changed from CPCCOHS1001A to CPCCOHS2001A Unit outcome altered Not equivalent to CPCCCO2003A

  • CPCCCO2013ACPCCCO2013equivalent26 November 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPCCCO2013A and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is CPCCCO2013A on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPCCCO2013A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where CPCCCO2013A is used

training.gov.au lists CPCCCO2013A inside 28 training products, none of them current. Every one of them is below, with the register's own core or elective flag for CPCCCO2013A in that product.

Products no longer current 28 listed

The register still records CPCCCO2013A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeCPCCCO2013A is
CPC20111Certificate II in ConstructionQualificationelective
CPC20112Certificate II in ConstructionQualificationcore
CPC20211Certificate II in Construction PathwaysQualificationelective
CPC20411Certificate II in ConcretingQualificationelective
CPC20511Certificate II in StoneworkingQualificationelective
CPC30111Certificate III in Bricklaying/BlocklayingQualificationelective
CPC30211Certificate III in CarpentryQualificationcore
CPC31011Certificate III in Solid PlasteringQualificationelective
CPC31311Certificate III in Wall and Floor TilingQualificationelective
CPC31411Certificate III in Construction WaterproofingQualificationelective
Show the remaining 18 products no longer current
CodeTraining productTypeCPCCCO2013A is
CPC31511Certificate III in Formwork/FalseworkQualificationcore
CPC31611Certificate III in PavingQualificationelective
CPC31711Certificate III in Low Rise Structural FramingQualificationelective
CPC31811Certificate III in ShopfittingQualificationelective
CPC31812Certificate III in ShopfittingQualificationelective
CPC32011Certificate III in Carpentry and JoineryQualificationcore
CPC32111Certificate III in SignageQualificationelective
CPC32211Certificate III in Joinery (Stairs)Qualificationelective
CPC32311Certificate III in Stonemasonry (Monumental/Installation)Qualificationcore
CPC32313Certificate III in Stonemasonry (Monumental/Installation)Qualificationelective
LMF21008Certificate II in Blinds and AwningsQualificationelective
LMT20507Certificate II in Textile FabricationQualificationelective
LMT30407Certificate III in Textile FabricationQualificationelective
MSF20113Certificate II in FurnishingQualificationelective
MSF30913Certificate III in Blinds, Awnings, Security Screens and GrillesQualificationelective
MSF30919Certificate III in Blinds, Awnings, Security Screens and GrillesQualificationelective
MST30216Certificate III in Manufactured Textile ProductsQualificationelective
MST30220Certificate III in Manufactured Textile ProductsQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPCCCO2013A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.