Can an RTO still enrol new students in CPC32313?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPC32313?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC32313 Certificate III in Stonemasonry (Monumental/Installation)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC32313Superseded — equivalentCertificate III in Stonemasonry (Monumental/Installation)
equivalent
CPC32320CurrentCertificate III in Stonemasonry

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC32311CPC32313not equivalent16 January 2014
Replaces superseded non-equivalent CPC32311.
CPC32313CPC32320equivalent26 November 2020
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPC32313 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPC32313_R2.docxCPC32313 release 2 · product document · published 26 November 2024
CPC32313_R2.pdfCPC32313 release 2 · product document · published 18 January 2017

Is CPC32313 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC32313 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC32313 is made of

training.gov.au lists 49 units for CPC32313: 19 core and 30 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 19 listed

Code	Unit	In this product
CPCCCA3002A	Carry out setting out	not current
CPCCCM1012A	Work effectively and sustainably in the construction industry	not current
CPCCCM1013A	Plan and organise work	not current
CPCCCM1014A	Conduct workplace communication	not current
CPCCCM1015A	Carry out measurements and calculations	not current
CPCCCM2001A	Read and interpret plans and specifications	not current
CPCCCM2002A	Carry out excavation	not current
CPCCCM2005B	Use construction tools and equipment	not current
CPCCCM2008B	Erect and dismantle restricted height scaffolding	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	not current
CPCCST2003A	Finish stone	not current
CPCCST2004A	Lay stone	not current
CPCCST2006A	Identify and use stone products	not current
CPCCST3001A	Dress and mould stone	not current
CPCCST3002A	Shape solid stone	not current
CPCCST3003A	Split stone manually	not current
CPCCST3004A	Dress stone manually	not current
CPCCST3006A	Machine stone	not current
CPCCST3022A	Carry out profile work	not current

Elective units 30 listed

Code	Unit	In this product
BSBSMB301	Investigate micro business opportunities	not current
BSBSMB406	Manage small business finances	not current
CPCCBL3016A	Construct battered masonry walls and piers	not current
CPCCCA3014A	Construct bulkheads	not current
CPCCCA3023A	Carry out levelling operations	not current
CPCCCM2007B	Use explosive power tools	not current
CPCCCM2009A	Carry out basic demolition	not current
CPCCCM2010B	Work safely at heights	not current
CPCCCM3001C	Operate elevated work platforms	not current
CPCCCO2013A	Carry out concreting to simple forms	not current
CPCCJN2001A	Assemble components	not current
CPCCJN2003A	Package manufactured products for transport	not current
CPCCPA3001A	Prepare subgrade, base and bedding course for segmental paving	not current
CPCCPA3002A	Lay segmental pavers	not current
CPCCPA3003A	Cut segmental pavers	not current
CPCCST2005A	Carry out load slinging of off-site materials	not current
CPCCST3007A	Turn stone	not current
CPCCST3009A	Use computer-controlled static machinery to produce stone components	not current
CPCCST3010A	Set out and cut letters in stone	not current
CPCCST3011A	Plan monument construction	not current
CPCCST3012A	Build stone veneer walls	not current
CPCCST3013A	Carry out cemetery monument fixing	not current
CPCCST3014A	Set and anchor stone facades	not current
CPCCST3015A	Apply gilding to stone	not current
CPCCST3016A	Build solid stonemasonry walls	not current
CPCCST3017A	Construct stone arches	not current
CPCCST3018A	Inlay lead to stone	not current
CPCCST3019A	Lay stonemasonry stairs	not current
CPCCST3020A	Produce reconstituted stone	not current
CPCCST3021A	Renovate and restore stone work	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC32313 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.