When must new enrolments into LMT30407 stop?

New enrolments are not permitted from 4 July 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMT30407?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMT30407 Certificate III in Textile Fabrication

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMT30407Superseded — equivalentCertificate III in Textile Fabrication
equivalent
MST30216Superseded — equivalentCertificate III in Manufactured Textile Products
equivalent
MST30220Superseded — equivalentCertificate III in Manufactured Textile Products
equivalent
MST30222CurrentCertificate III in Manufactured Textile Products

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMT30407MST30216equivalent3 July 2016
Supersedes and is equivalent to LMT30407 Certificate III in Textile Fabrication

Is LMT30407 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMT30407 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMT30407 is made of

training.gov.au lists 74 units for LMT30407. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 74 listed

Code	Unit	Core or elective	In this product
AHCLSC308A	Install metal structures and features	`N/A`	not current
CPCCCM2002A	Carry out excavation	`N/A`	not current
CPCCCO2013A	Carry out concreting to simple forms	`N/A`	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	`N/A`	not current
LMTCL2001B	Use a sewing machine	`N/A`	not current
LMTGN2001B	Follow defined OHS policies and procedures	`N/A`	not current
LMTGN2002B	Apply quality standards	`N/A`	not current
LMTGN2003B	Work in the Textiles, Clothing and Footwear industry	`N/A`	not current
LMTGN2004B	Work in a team environment	`N/A`	not current
LMTGN2005B	Perform minor maintenance	`N/A`	not current
LMTGN2008B	Coordinate work of team or section	`N/A`	not current
LMTGN2009B	Operate computing technology in a textiles, clothing and footwear workplace	`N/A`	not current
LMTGN2010B	Perform tasks to support production	`N/A`	not current
LMTGN3001B	Control production in a section of a textiles, clothing and footwear enterprise	`N/A`	not current
LMTGN3002B	Organise and plan own work to achieve planned outcomes	`N/A`	not current
LMTGN3003B	Estimate and cost job	`N/A`	not current
LMTGN3005B	Plan tasks to assist production operations	`N/A`	not current
LMTLG2006A	Identify materials used in leather goods production	`N/A`	not current
LMTLG3001A	Make a prototype	`N/A`	not current
LMTTF2001A	Despatch products	`N/A`	not current
LMTTF2003A	Package and handle products for despatch	`N/A`	not current
LMTTF2004A	Add reinforcements and attachments	`N/A`	not current
LMTTF2005A	Translate information into measurements or diagrams	`N/A`	not current
LMTTF2006A	Measure and scale geometric shapes	`N/A`	not current
LMTTF2007A	Produce patterns for 2D products	`N/A`	not current
LMTTF2008A	Use adhesives	`N/A`	not current
LMTTF2009A	Identify and select canvas and sail materials	`N/A`	not current
LMTTF2010A	Lay out and mark out canvas or sail materials	`N/A`	not current
LMTTF2011A	Cut and shape canvas or sail materials	`N/A`	not current
LMTTF2012A	Stitch by hand	`N/A`	not current

Show the remaining 44 units

Code	Unit	Core or elective	In this product
LMTTF2013A	Waterproof canvas products	`N/A`	not current
LMTTF2014A	Weld plastic materials	`N/A`	not current
LMTTF2016A	Install products on and off site	`N/A`	not current
LMTTF2017A	Cut, bend and shape metal	`N/A`	not current
LMTTF2018A	Use canvas and sail production tools	`N/A`	not current
LMTTF2019A	Inspect canvas or sail product	`N/A`	not current
LMTTF3001A	Identify customer requirements (on site)	`N/A`	not current
LMTTF3002A	Gain customer acceptance of service proposal	`N/A`	not current
LMTTF3003A	Produce patterns for 3D products	`N/A`	not current
LMTTF3004A	Perform advanced welding of plastic materials	`N/A`	not current
LMTTF3005A	Apply lofting skills to sail making	`N/A`	not current
LMTTF3006A	Cut and join sail panels	`N/A`	not current
LMTTX2012B	Perform industrial sewing on textile products	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
MSACMT270A	Use sustainable energy practices	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSS402001A	Apply competitive systems and practices	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402010A	Manage the impact of change on own work	`N/A`	not current
MSS402020A	Apply quick changeover procedures	`N/A`	not current
MSS402021A	Apply Just in Time procedures	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402031A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402061A	Use SCADA systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
MSS402081A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
MSS403001A	Implement competitive systems and practices	`N/A`	not current
MSS403002A	Ensure process improvements are sustained	`N/A`	not current
MSS403010A	Facilitate change in an organisation implementing competitive systems and practices	`N/A`	not current
MSS403021A	Facilitate a Just in Time system	`N/A`	not current
MSS403030A	Improve cost factors in work practices	`N/A`	not current
MSS403032A	Analyse manual handling processes	`N/A`	not current
MSS403040A	Facilitate and improve implementation of 5S	`N/A`	not current
MSS403051A	Mistake proof an operational process	`N/A`	not current
MSS404050A	Undertake process capability improvements	`N/A`	not current
MSS404052A	Apply statistics to operational processes	`N/A`	not current
MSS404060A	Facilitate the use of planning software systems in a work area or team	`N/A`	not current
MSS404061A	Facilitate the use of SCADA systems in a team or work area	`N/A`	not current
MSS404081A	Undertake proactive maintenance analyses	`N/A`	not current
MSS404082A	Assist in implementing a proactive maintenance strategy	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Is LMT30407 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.