Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MST30220 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MST30220 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MST30220 is made of
training.gov.au lists 42 units for MST30220: 10 core and 32 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 10 listed
| Code | Unit | In this product |
|---|---|---|
| MEM16008A | Interact with computing technology | !not current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
| MSMOPS101 | Make measurements | ●current |
| MSMSUP102 | Communicate in the workplace | ●current |
| MSMWHS200 | Work safely | ●current |
| MSS402051 | Apply quality standards | !not current |
| MSTTF2003 | Use canvas and sail production tools | !not current |
| MSTTF2005 | Translate information into measurements or diagrams | !not current |
| MSTTF2009 | Identify and select canvas and sail materials | !not current |
| MSTTX2014 | Perform industrial sewing on textile products | ●current |
Elective units 32 listed
| Code | Unit | In this product |
|---|---|---|
| AHCLSC308 | Install metal structures and features | !not current |
| AURVTT004 | Trim vehicle components | ●current |
| AURVTT014 | Fabricate and fit marine covers | ●current |
| AURVTT019 | Fabricate and install automotive and marine frames, canopies and side curtains | !not current |
| AURVTT020 | Select and use leather in automotive and marine trimming | ●current |
| CPCCCM2002A | Carry out excavation | !not current |
| CPCCCO2013A | Carry out concreting to simple forms | !not current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| MEM05012 | Perform routine manual metal arc welding | ●current |
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM30031A | Operate computer-aided design (CAD) system to produce basic drawing elements | !not current |
| MEM30032A | Produce basic engineering drawings | !not current |
| MEM30033A | Use computer-aided design (CAD) to create and display 3-D models | !not current |
| MSFSF3013 | Provide technical advice to customers | !not current |
| MSMSUP106 | Work in a team | ●current |
| MSMSUP390 | Use structured problem-solving tools | ●current |
| MSTGN2005 | Perform minor maintenance | !not current |
| MSTGN3003 | Estimate and cost job | !not current |
| MSTLG3001 | Make a prototype | !not current |
| MSTTF2006 | Measure and scale geometric shapes | !not current |
| MSTTF2007 | Produce patterns for 2-D products | !not current |
| MSTTF2008 | Use adhesives | !not current |
| MSTTF2012 | Stitch by hand | !not current |
| MSTTF2014 | Weld plastic materials | !not current |
| MSTTF3001 | Identify client and site requirements for installation of fabricated textile products | !not current |
| MSTTF3002 | Gain customer acceptance of service proposal | !not current |
| MSTTF3003 | Produce patterns for 3-D products | !not current |
| MSTTF3004 | Perform advanced welding of plastic materials | !not current |
| MSTTF3005 | Apply lofting skills to sail making | !not current |
| MSTTF3006 | Cut and join sail panels | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MST training product on the register · Search all training products
Is MST30220 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.