Can an RTO still enrol new students in CPC32111?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 9 September 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPC32111?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC32111 Certificate III in Signage

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC32111Superseded — not equivalentCertificate III in Signage
not equivalent
CPC30216CurrentCertificate III in Signs and Graphics

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC32108CPC32111not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC32111CPC30216not equivalent8 September 2016
Revised qualification replacing superseded non-equivalent CPC32111 Certificate III in Signage.

Official documents on the register

What training.gov.au lists for CPC32111 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPC32111_R2.docxCPC32111 release 2 · product document · published 26 November 2024
CPC32111_R2.pdfCPC32111 release 2 · product document · published 10 February 2013

Is CPC32111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC32111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC32111 is made of

training.gov.au lists 38 units for CPC32111: 5 core and 0 elective, and 33 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Core units 5 listed

Code	Unit	In this product
CPCCCM1012A	Work effectively and sustainably in the construction industry	not current
CPCCCM1013A	Plan and organise work	not current
CPCCCM1014A	Conduct workplace communication	not current
CPCCCM1015A	Carry out measurements and calculations	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	not current

Units the register marks neither core nor elective 33 listed

Code	Unit	Core or elective	In this product
BSBSMB301A	Investigate micro business opportunities	`N/A`	not current
BSBSMB406A	Manage small business finances	`N/A`	not current
CPCCCM2006B	Apply basic levelling procedures	`N/A`	not current
CPCCCM2008B	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCM2010B	Work safely at heights	`N/A`	not current
CPCCCM3001C	Operate elevated work platforms	`N/A`	not current
CPCCCM3003A	Work safely around power sources, services and assets	`N/A`	not current
CPCCCO2013A	Carry out concreting to simple forms	`N/A`	not current
CPCCSI2001A	Use colour for signage	`N/A`	not current
CPCCSI2002A	Lay out and design signage	`N/A`	not current
CPCCSI2003A	Prepare surfaces for signage	`N/A`	not current
CPCCSI2004A	Produce digital signage	`N/A`	not current
CPCCSI2005A	Fabricate signage	`N/A`	not current
CPCCSI2006A	Signwrite to simple forms	`N/A`	not current
CPCCSI2007A	Apply fasteners and fixings	`N/A`	not current
CPCCSI3001A	Produce vinyl signage	`N/A`	not current
CPCCSI3002A	Use rotary router	`N/A`	not current
CPCCSI3003A	Signwrite to decorative forms	`N/A`	not current
CPCCSI3004A	Apply advanced vinyl applications	`N/A`	not current
CPCCSI3005A	Use engraving systems	`N/A`	not current
CPCCSI3006A	Apply gilding to signage	`N/A`	not current
CPCCSI3007A	Apply lines and scrolls	`N/A`	not current
CPCCSI3008A	Write showcards and chalkboards	`N/A`	not current
CPCCSI3009A	Screen-print signage	`N/A`	not current
CPCCSI3010A	Hand render pictorials	`N/A`	not current
CPCCSI3011A	Use LED technology for signage	`N/A`	not current
CPCCSI3012A	Apply electrical theory for illuminated signage	`N/A`	not current
CPCCSI3013A	Install LED systems	`N/A`	not current
CPCCSI3014A	Manufacture gas-charged glass-formed illuminated signage	`N/A`	not current
CPCCSI3015A	Produce airbrushed signage	`N/A`	not current

Show the remaining 3 units

Code	Unit	Core or elective	In this product
CPCCSI3016A	Produce digital signage using advanced software applications	`N/A`	not current
MEM05010C	Apply fabrication, forming and shaping techniques	`N/A`	not current
TLILIC2001A	Licence to operate a forklift truck	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC32111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.