CPC31611 Certificate III in Paving

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in CPC31611 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for CPC31611, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
14 February 2021
Latest release
Release 3 · 17 January 2017 · 3 releases in all
Supersedes
CPC31608
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from CPC31611. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPC31608CPC31611not equivalent20 May 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPC31611 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • CPC31611_R3.docxCPC31611 release 3 · product document · published 26 November 2024
  • CPC31611_R3.pdfCPC31611 release 3 · product document · published 18 January 2017

Is CPC31611 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC31611 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC31611 is made of

training.gov.au lists 27 units for CPC31611: 8 core and 4 elective, and 15 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 8 listed

CodeUnitIn this product
CPCCCM1012AWork effectively and sustainably in the construction industrynot current
CPCCCM1013APlan and organise worknot current
CPCCCM1014AConduct workplace communicationnot current
CPCCCM1015ACarry out measurements and calculationsnot current
CPCCCM2001ARead and interpret plans and specificationsnot current
CPCCCM2004AHandle construction materialsnot current
CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industrynot current
CPCCVE1011AUndertake a basic construction projectnot current

Elective units 4 listed

CodeUnitIn this product
AHCLSC303Construct brick and block structures and featuresnot current
BSBSMB301Investigate micro business opportunitiesnot current
BSBSMB406Manage small business financesnot current
RIIWMG203DDrain and dewater civil construction sitenot current

Units the register marks neither core nor elective 15 listed

CodeUnitCore or electiveIn this product
AHCLSC307AImplement a retaining wall projectN/Anot current
CPCCBL3004AConstruct masonry steps and stairsN/Anot current
CPCCCA3001ACarry out general demolition of minor building structuresN/Anot current
CPCCCM2002ACarry out excavationN/Anot current
CPCCCM2003BCalculate and cost construction workN/Anot current
CPCCCM2005BUse construction tools and equipmentN/Anot current
CPCCCM2006BApply basic levelling proceduresN/Anot current
CPCCCO2013ACarry out concreting to simple formsN/Anot current
CPCCDE2012ACarry out manual general demolitionN/Anot current
CPCCPA3001APrepare subgrade, base and bedding course for segmental pavingN/Anot current
CPCCPA3002ALay segmental paversN/Anot current
CPCCPA3003ACut segmental paversN/Anot current
CPCCPA3004AFinish segmental pavingN/Anot current
CPCCPA3005AMaintain and repair segmental pavingN/Anot current
CPCCSF2004APlace and fix reinforcement materialsN/Anot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with how the register lists CPC31611 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC31611 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.