When must new enrolments into CPC31812 stop?

New enrolments are not permitted from 9 September 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in CPC31812?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC31812 Certificate III in Shopfitting

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC31812Superseded — not equivalentCertificate III in Shopfitting
not equivalent
CPC30116Superseded — equivalentCertificate III in Shopfitting
equivalent
CPC30120CurrentCertificate III in Shopfitting

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC31811CPC31812not equivalent6 February 2013
Revised qualification deemed not equivalent to CPC31811 Core and elective units revised resulting in a number of unit identifier changes Code change to core unit: • CPCCSH3004A revised and not equivalent to CPCCSH3006A
CPC31812CPC30116not equivalent8 September 2016
Revised qualification replacing superseded non-equivalent CPC31812 Certificate III in Shopfitting.

Is CPC31812 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC31812 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC31812 is made of

training.gov.au lists 42 units for CPC31812: 9 core and 0 elective, and 33 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Core units 9 listed

Code	Unit	In this product
CPCCCM1012A	Work effectively and sustainably in the construction industry	not current
CPCCCM1013A	Plan and organise work	not current
CPCCCM1014A	Conduct workplace communication	not current
CPCCCM1015A	Carry out measurements and calculations	not current
CPCCCM2001A	Read and interpret plans and specifications	not current
CPCCCM2004A	Handle construction materials	not current
CPCCCM2005B	Use construction tools and equipment	not current
CPCCCM2006B	Apply basic levelling procedures	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	not current

Units the register marks neither core nor elective 33 listed

Code	Unit	Core or elective	In this product
BSBSMB301A	Investigate micro business opportunities	`N/A`	not current
BSBSMB406A	Manage small business finances	`N/A`	not current
CPCCCA3001A	Carry out general demolition of minor building structures	`N/A`	not current
CPCCCA3010A	Install and replace windows and doors	`N/A`	not current
CPCCCA3013A	Install lining, panelling and moulding	`N/A`	not current
CPCCCA3014A	Construct bulkheads	`N/A`	not current
CPCCCA3015A	Assemble partitions	`N/A`	not current
CPCCCM2003B	Calculate and cost construction work	`N/A`	not current
CPCCCM2007B	Use explosive power tools	`N/A`	not current
CPCCCM2008B	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCM2010B	Work safely at heights	`N/A`	not current
CPCCCM3001C	Operate elevated work platforms	`N/A`	not current
CPCCCO2013A	Carry out concreting to simple forms	`N/A`	not current
CPCCJN3001A	Use static machines	`N/A`	not current
CPCCJN3002A	Use computer-controlled machinery	`N/A`	not current
CPCCJN3003A	Manufacture components for door and window frames and doors	`N/A`	not current
CPCCJN3005A	Cut and install glass	`N/A`	not current
CPCCPB3015A	Install acoustic and thermal environmental protection systems	`N/A`	not current
CPCCSF2003A	Cut and bend materials using oxy-LPG equipment	`N/A`	not current
CPCCSH2001A	Prepare surfaces	`N/A`	not current
CPCCSH2002A	Use aluminium sections for fabrication	`N/A`	not current
CPCCSH2003A	Apply and install sealant and sealant devices	`N/A`	not current
CPCCSH3001A	Set out and assemble cabinets, showcases, wall units, counters and workstations	`N/A`	not current
CPCCSH3002A	Set out and fabricate shopfront commercial entries bulkheads and component fittings	`N/A`	not current
CPCCSH3003A	Assemble and install shopfront commercial entries bulkheads and components	`N/A`	not current
CPCCSH3005A	Apply and trim decorative finishes	`N/A`	not current
CPCCSH3006A	Apply finishes	`N/A`	not current
CPCCWC3004A	Install suspended ceilings	`N/A`	not current
LMFFM3006B	Install furnishing	`N/A`	not current
LMFFM3013B	Measure and draw site layout for manufactured furniture products	`N/A`	not current

Show the remaining 3 units

Code	Unit	Core or elective	In this product
LMFFM3028B	Fabricate synthetic solid surface products	`N/A`	not current
LMFFM3030B	Set up, operate and maintain CNC sizing machines	`N/A`	not current
LMFFM3031B	Set up, operate and maintain CNC machining and processing centres	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Is CPC31812 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.