Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is CPC30111 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC30111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC30111 is made of
training.gov.au lists 36 units for CPC30111: 10 core and 2 elective, and 24 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 10 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCA3002A | Carry out setting out | !not current |
| CPCCCM1012A | Work effectively and sustainably in the construction industry | !not current |
| CPCCCM1013A | Plan and organise work | !not current |
| CPCCCM1014A | Conduct workplace communication | !not current |
| CPCCCM1015A | Carry out measurements and calculations | !not current |
| CPCCCM2001A | Read and interpret plans and specifications | !not current |
| CPCCCM2006A | Apply basic levelling procedures | !not current |
| CPCCCM2008A | Erect and dismantle restricted height scaffolding | !not current |
| CPCCCM2009A | Carry out basic demolition | !not current |
| CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | !not current |
Elective units 2 listed
Units the register marks neither core nor elective 24 listed
| Code | Unit | Core or elective | In this product |
|---|---|---|---|
| CPCCBL2001A | Handle and prepare bricklaying and blocklaying materials | N/A | !not current |
| CPCCBL2002A | Use bricklaying and blocklaying tools and equipment | N/A | !not current |
| CPCCBL3001A | Lay paving | N/A | !not current |
| CPCCBL3002A | Carry out masonry veneer construction | N/A | !not current |
| CPCCBL3003A | Carry out cavity brick construction | N/A | !not current |
| CPCCBL3004A | Construct masonry steps and stairs | N/A | !not current |
| CPCCBL3005A | Lay masonry walls and corners | N/A | !not current |
| CPCCBL3006A | Lay multi-thickness walls and piers | N/A | !not current |
| CPCCBL3007A | Install glass blockwork | N/A | !not current |
| CPCCBL3009A | Install flashings and damp proof course | N/A | !not current |
| CPCCBL3010A | Construct masonry arches | N/A | !not current |
| CPCCBL3011A | Construct curved walls | N/A | !not current |
| CPCCBL3012A | Construct fireplaces and chimneys | N/A | !not current |
| CPCCBL3013A | Construct masonry structural systems | N/A | !not current |
| CPCCBL3014A | Install fire-rated masonry construction | N/A | !not current |
| CPCCBL3015A | Construct decorative brickwork | N/A | !not current |
| CPCCBL3016A | Construct battered masonry walls and piers | N/A | !not current |
| CPCCBL3017A | Carry out tuck pointing to brickwork | N/A | !not current |
| CPCCBL3018A | Install aerated autoclaved concrete products | N/A | !not current |
| CPCCCM2007B | Use explosive power tools | N/A | !not current |
| CPCCCM2010B | Work safely at heights | N/A | !not current |
| CPCCCM3001C | Operate elevated work platforms | N/A | !not current |
| CPCCCO2013A | Carry out concreting to simple forms | N/A | !not current |
| CPCCSF2004A | Place and fix reinforcement materials | N/A | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Is CPC30111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.