Can an RTO still enrol new students in CPC20111?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 7 February 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPC20111?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC20111 Certificate II in Construction

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC20111Superseded — not equivalentCertificate II in Construction
not equivalent
CPC20112Superseded — equivalentCertificate II in Construction
equivalent
CPC20120CurrentCertificate II in Construction

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC20108CPC20111not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC20111CPC20112not equivalent6 February 2013
Revised qualification deemed not equivalent to CPC20111 Qualification packaging amended: • same total number of units, but core units required increased by one and elective units reduced with the move of CPCCCM2010B from elective to core • change in options regarding choice of elective units • elective unit grouping changed resulting in deletion of some elective units Core and elective units revised resulting in a number of unit identifier changes

Official documents on the register

What training.gov.au lists for CPC20111 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPC20111_R1.pdfCPC20111 release 1 · product document · published 20 July 2012
CPC20111_R1.docxCPC20111 release 1 · product document · published 26 November 2024

Is CPC20111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC20111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC20111 is made of

training.gov.au lists 42 units for CPC20111. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 42 listed

Code	Unit	Core or elective	In this product
CPCCCA2003A	Erect and dismantle formwork for footings and slabs on ground	`N/A`	not current
CPCCCM1012A	Work effectively and sustainably in the construction industry	`N/A`	not current
CPCCCM1013A	Plan and organise work	`N/A`	not current
CPCCCM1014A	Conduct workplace communication	`N/A`	not current
CPCCCM1015A	Carry out measurements and calculations	`N/A`	not current
CPCCCM2001A	Read and interpret plans and specifications	`N/A`	not current
CPCCCM2002A	Carry out excavation	`N/A`	not current
CPCCCM2005A	Use construction tools and equipment	`N/A`	not current
CPCCCM2006A	Apply basic levelling procedures	`N/A`	not current
CPCCCM2007A	Use explosive power tools	`N/A`	not current
CPCCCM2008A	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCM2009A	Carry out basic demolition	`N/A`	not current
CPCCCM2010A	Work safely at heights	`N/A`	not current
CPCCCM3001B	Operate elevated work platforms	`N/A`	not current
CPCCCM3003A	Work safely around power sources, services and assets	`N/A`	not current
CPCCCO2013A	Carry out concreting to simple forms	`N/A`	not current
CPCCCO3027A	Cut and core concrete	`N/A`	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	`N/A`	not current
CPCCPD2013A	Remove and replace doors and door and window components	`N/A`	not current
CPCCPD3029A	Remove graffiti and apply protective coatings	`N/A`	not current
CPCCPD3030A	Apply protective paint coating systems	`N/A`	not current
CPCCRI3001A	Operate personnel and materials hoists	`N/A`	not current
CPCCSF2004A	Place and fix reinforcement materials	`N/A`	not current
CPCCSH2003A	Apply and install sealant and sealant devices	`N/A`	not current
CPCCSP2003A	Prepare surfaces for plastering	`N/A`	not current
CPCCWC2001A	Complete penetrations and flashings	`N/A`	not current
CPCCWF3004A	Repair wall and floor tiles	`N/A`	not current
CPCCWP2003A	Prepare for construction waterproofing process	`N/A`	not current
CPCCWP2004A	Prepare surfaces for waterproofing application	`N/A`	not current
LMFGG1001B	Complete a basic glass and glazing project	`N/A`	not current

Show the remaining 12 units

Code	Unit	Core or elective	In this product
LMFGG3015B	Fabricate and install shower screens and wardrobe doors	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
RIICBS201A	Conduct tack coat spraying operations	`N/A`	not current
RIICBS202A	Hand spread asphalt	`N/A`	not current
RIICBS203A	Safely handle bituminous materials	`N/A`	not current
RIICCM207A	Spread and compact materials manually	`N/A`	not current
RIICCM210A	Install trench support	`N/A`	not current
RIIOHS202A	Enter and work in confined spaces	`N/A`	not current
RIIOHS205A	Control traffic with stop-slow bat	`N/A`	not current
RIISAM204A	Operate small plant and equipment	`N/A`	not current
RIIWMG203A	Drain and dewater civil construction site	`N/A`	not current
TLILIC108A	Licence to operate a forklift truck	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC20111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.