CPCCCA2002B Use carpentry tools and equipment

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPCCCA2002B ended on 25 November 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
25 November 2020
Latest release
Release 1 · 7 February 2013
Supersedes
CPCCCA2002A
Superseded by
CPCCCA2002 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPCCCA2002BSuperseded — equivalentUse carpentry tools and equipment
  2. equivalent
  3. CPCCCA2002CurrentUse carpentry tools and equipment

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPCCCA2002ACPCCCA2002Bequivalent6 February 2013

    Minor editorial corrections, including: • removing reference to drawing requirements • reformatting and rewording some critical aspects (intent unchanged) to enhance clarity

  • CPCCCA2002BCPCCCA2002equivalent26 November 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPCCCA2002B and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is CPCCCA2002B on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPCCCA2002B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where CPCCCA2002B is used

training.gov.au lists CPCCCA2002B inside 14 training products, none of them current. Every one of them is below, with the register's own core or elective flag for CPCCCA2002B in that product.

Products no longer current 14 listed

The register still records CPCCCA2002B inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeCPCCCA2002B is
CPC20211Certificate II in Construction PathwaysQualificationelective
CPC30211Certificate III in CarpentryQualificationcore
CPC30411Certificate III in DemolitionQualificationelective
CPC31511Certificate III in Formwork/FalseworkQualificationcore
CPC31912Certificate III in JoineryQualificationcore
CPC32011Certificate III in Carpentry and JoineryQualificationcore
CPC32211Certificate III in Joinery (Stairs)Qualificationcore
CUA20213Certificate II in Live Production and ServicesQualificationelective
CUA20215Certificate II in Creative IndustriesQualificationelective
CUA30413Certificate III in Live Production and ServicesQualificationelective
Show the remaining 4 products no longer current
CodeTraining productTypeCPCCCA2002B is
CUA30415Certificate III in Live Production and ServicesQualificationelective
CUA40413Certificate IV in Live Production and Technical ServicesQualificationelective
CUA40415Certificate IV in Live Production and Technical ServicesQualificationelective
CUASS00032Set Construction Skill SetSkill setelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPCCCA2002B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.