Where the register points next
training.gov.au points at nothing after CPC30220: it is the current product, and no replacement is listed.
This product is listed on the National Schedule of Training Product Development: under review by BuildSkills Australia (Formwork Falsework), with submission to the Assurance Body expected by 29 May 2026. That date has passed, so a revised product can reach the register at any time — but submission is not publication, and the record above is still what the register says today.
Source: National Schedule of Training Product Development, training.gov.au (© Commonwealth of Australia), licensed under Creative Commons Attribution 4.0. Excludes the Commonwealth Coat of Arms, trademarks and third-party material. View the Schedule. Schedule read on 25 August 2026 UTC.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
CPC30211CPC30220=equivalent26 November 2020
The register records this supersession but attaches no note on what changed.
CPC31511CPC30220≠not equivalent26 November 2020
The register records this supersession but attaches no note on what changed.
CPC32011CPC30220≠not equivalent26 November 2020
The register records this supersession but attaches no note on what changed.
Is CPC30220 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC30220 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC30220 is made of
training.gov.au lists 60 units for CPC30220: 27 core and 33 elective. To complete it, the register publishes a rule of 27 core units plus 7 electives — 34 units in all.
Core units 27 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCA2002 | Use carpentry tools and equipment | ●current |
| CPCCCA2011 | Handle carpentry materials | ●current |
| CPCCCA3001 | Carry out general demolition of minor building structures | ●current |
| CPCCCA3002 | Carry out setting out | ●current |
| CPCCCA3003 | Install flooring systems | ●current |
| CPCCCA3004 | Construct and erect wall frames | ●current |
| CPCCCA3005 | Construct ceiling frames | ●current |
| CPCCCA3006 | Erect roof trusses | ●current |
| CPCCCA3007 | Construct pitched roofs | ●current |
| CPCCCA3008 | Construct eaves | ●current |
| CPCCCA3010 | Install windows and doors | ●current |
| CPCCCA3016 | Construct, assemble and install timber external stairs | ●current |
| CPCCCA3017 | Install exterior cladding | ●current |
| CPCCCA3024 | Install lining, panelling and moulding | ●current |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work | ●current |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground | ●current |
| CPCCCM2006 | Apply basic levelling procedures | ●current |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding | ●current |
| CPCCCM2012 | Work safely at heights | ●current |
| CPCCCO2013 | Carry out concreting to simple forms | ●current |
| CPCCOM1012 | Work effectively and sustainably in the construction industry | ●current |
| CPCCOM1014 | Conduct workplace communication | ●current |
| CPCCOM1015 | Carry out measurements and calculations | ●current |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements | ●current |
| CPCCOM3006 | Carry out levelling operations | ●current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies | ●current |
Elective units 33 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCA3009 | Construct advanced roofs | ●current |
| CPCCCA3011 | Refurbish timber sashes to window frames | ●current |
| CPCCCA3012 | Frame and fit wet area fixtures | ●current |
| CPCCCA3014 | Construct and install bulkheads | ●current |
| CPCCCA3018 | Construct, erect and dismantle formwork for stairs and ramps | ●current |
| CPCCCA3019 | Erect and dismantle formwork to suspended slabs, columns, beams and walls | ●current |
| CPCCCA3020 | Erect and dismantle jump form formwork | ●current |
| CPCCCA3022 | Install curtain walling | ●current |
| CPCCCA3026 | Assemble partitions | ●current |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools | ●current |
| CPCCCM2002 | Carry out hand excavation | ●current |
| CPCCCM3001 | Operate elevated work platforms up to 11 metres | ●current |
| CPCCCM3005 | Calculate costs of construction work | ●current |
| CPCCJN3003 | Manufacture components for doors, windows and frames | ●current |
| CPCCJN3004 | Manufacture and assemble joinery components | ●current |
| CPCCJN3100 | Process materials to produce components using static machines | ●current |
| CPCCLSF2001 | Licence to erect, alter and dismantle scaffolding basic level | ●current |
| CPCCOM1013 | Plan and organise work | ●current |
| CPCCON3048 | Construct tilt panels on site | ●current |
| CPCCPB3001 | Fix standard plasterboard wall sheets | ●current |
| CPCCPB3002 | Fix standard plasterboard ceiling sheets | ●current |
| CPCCSF2004 | Place and fix reinforcement materials | ●current |
| CPCCSF2005 | Arc weld reinforcement steel | ●current |
| CPCCSF3002 | Carry out monostrand post-tensioning | ●current |
| CPCCSF3003 | Carry out multistrand post-tensioning | ●current |
| CPCCSF3004 | Carry out stressbar post-tensioning | ●current |
| CPCCST4001 | Prepare to undertake the heritage restoration process | ●current |
| CPCCST4002 | Undertake the heritage restoration process | ●current |
| CPCCWC3003 | Install dry wall passive fire-rated systems | ●current |
| CPCCWC3004 | Install suspended ceilings | ●current |
Show the remaining 3 elective units
| Code | Unit | In this product |
|---|---|---|
| CPCPCM2043 | Carry out WHS requirements | ●current |
| CPCPCM2052 | Weld mild steel using oxy-acetylene equipment | ●current |
| CPCPCM2053 | Weld using metal arc welding equipment | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day CPC30220 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.