Can an RTO still enrol new students in TLI42111?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 1 March 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in TLI42111?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

TLI42111 Certificate IV in Driving Operations

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

TLI42111Superseded — not equivalentCertificate IV in Driving Operations
not equivalent
TLI42116Superseded — equivalentCertificate IV in Driving Operations
equivalent
TLI40119Superseded — not equivalentCertificate IV in Driving Operations
not equivalent
TLI40121Superseded — equivalentCertificate IV in Specialist Driving Operations
equivalent
TLI40122CurrentCertificate IV in Specialist Driving Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

TLI42111TLI42116not equivalent28 February 2016
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for TLI42111 and for its training package TLI10 (release 4.2), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

TLI42111_R4.pdfTLI42111 release 4 · product document · published 17 February 2014
TLI42111_R4.docxTLI42111 release 4 · product document · published 26 November 2024

Is TLI42111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLI42111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLI42111 is made of

training.gov.au lists 48 units for TLI42111. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 48 listed

Code	Unit	Core or elective	In this product
AHCARB205A	Operate and maintain chainsaws	`N/A`	not current
AURV328961A	Recover vehicle	`N/A`	not current
CPCCSF2003A	Cut and bend materials using oxy-LPG equipment	`N/A`	not current
HLTAMBPD401C	Manage personal stressors in the work environment	`N/A`	not current
PUADEFVH001A	Conduct recovery vehicle operations in a field environment	`N/A`	not current
PUADEFVH002A	Extract disabled equipment using winching techniques in a field environment	`N/A`	not current
RIICBS312A	Conduct bitumen tanker operations	`N/A`	not current
TLIB2004A	Carry out vehicle inspection	`N/A`	not current
TLIC1051A	Operate commercial vehicle	`N/A`	not current
TLIC2002A	Drive light rigid vehicle	`N/A`	not current
TLIC3003A	Drive medium rigid vehicle	`N/A`	not current
TLIC3004A	Drive heavy rigid vehicle	`N/A`	not current
TLIC3005A	Drive heavy combination vehicle	`N/A`	not current
TLIC4006A	Drive multi-combination vehicle	`N/A`	not current
TLIC4065A	Operate chemical tanker	`N/A`	not current
TLIC4066A	Operate fuel tanker	`N/A`	not current
TLIC4067A	Operate LP gas tanker	`N/A`	not current
TLIC4068A	Operate heavy recovery ancillary equipment	`N/A`	not current
TLIC4069A	Operate heavy recovery vehicle	`N/A`	not current
TLIC4070A	Tow a disabled heavy vehicle	`N/A`	not current
TLID4048A	Top load a dangerous goods tanker	`N/A`	not current
TLID4049A	Bottom load a dangerous goods tanker	`N/A`	not current
TLID4050A	Discharge a dangerous goods tanker	`N/A`	not current
TLIE1005A	Carry out basic workplace calculations	`N/A`	not current
TLIE3026A	Carry out advanced calculations in the transport logistics industry	`N/A`	not current
TLIE4025A	Prepare and process transport documentation for dangerous goods	`N/A`	not current
TLIF2010A	Apply fatigue management strategies	`N/A`	not current
TLIF2018A	Operate firefighting equipment	`N/A`	not current
TLIF2092A	Demonstrate awareness of chain of responsibility regulations	`N/A`	not current
TLIF3093A	Implement chain of responsibility regulations	`N/A`	not current

Show the remaining 18 units

Code	Unit	Core or elective	In this product
TLIF3096A	Carry out emergency response to a dangerous goods incident	`N/A`	not current
TLIF4007A	Implement and coordinate accident-emergency procedures	`N/A`	not current
TLIF4065A	Ensure compliance with Australian Dangerous Goods Code	`N/A`	not current
TLIF4066A	Implement and supervise transport regulations compliance systems	`N/A`	not current
TLIF4095A	Apply occupational health and safety requirements for driving operations	`N/A`	not current
TLIH2001A	Interpret road maps and navigate pre-determined routes	`N/A`	not current
TLIH3002A	Plan and navigate routes	`N/A`	not current
TLIJ4010A	Implement quality systems and procedures in a dangerous goods workplace	`N/A`	not current
TLIL4010A	Assess and confirm customer transport requirements	`N/A`	not current
TLIL4079A	Manage the recovery process	`N/A`	not current
TLILIC0012A	Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)	`N/A`	not current
TLILIC2014B	Licence to drive a light rigid vehicle	`N/A`	not current
TLILIC2015B	Licence to drive a medium rigid vehicle	`N/A`	not current
TLILIC2016B	Licence to drive a heavy rigid vehicle	`N/A`	not current
TLILIC3013A	Preparation to transport dangerous goods by road	`N/A`	not current
TLILIC3017B	Licence to drive a heavy combination vehicle	`N/A`	not current
TLILIC3018B	Licence to drive a multi combination vehicle	`N/A`	not current
TLIU1009A	Monitor plant and equipment in an environmentally sustainable manner	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is TLI42111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.