TLI42116 Certificate IV in Driving Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLI42116 ended on 10 June 2020 — 6 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 12 June 2021 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
TLI — Transport and Logistics Training Package
Currency period ends
10 June 2020
Latest release
Release 4 · 13 September 2018 · 4 releases in all
Supersedes
TLI42111
Superseded by
TLI40119 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLI42116Superseded — equivalentCertificate IV in Driving Operations
  2. equivalent
  3. TLI40119Superseded — not equivalentCertificate IV in Driving Operations
  4. not equivalent
  5. TLI40121Superseded — equivalentCertificate IV in Specialist Driving Operations
  6. equivalent
  7. TLI40122CurrentCertificate IV in Specialist Driving Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLI42111TLI42116not equivalent28 February 2016

    The register records this supersession but attaches no note on what changed.

  • TLI42116TLI40119equivalent11 June 2020

    The register records this supersession but attaches no note on what changed.

Is TLI42116 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLI42116 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLI42116 is made of

training.gov.au lists 52 units for TLI42116: 4 core and 48 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 4 listed

CodeUnitIn this product
TLIF0001Apply chain of responsibility legislation, regulations and workplace proceduresnot current
TLIF2010Apply fatigue management strategiescurrent
TLIF4066Implement and supervise transport regulations compliance systemscurrent
TLIF4095Apply work health and safety requirements for driving operationscurrent

Elective units 48 listed

CodeUnitIn this product
AHCMOM213Operate and maintain chainsawscurrent
AURVGA3002Recover vehiclesnot current
CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industrynot current
CPCCSF2003ACut and bend materials using oxy-LPG equipmentnot current
HLTWHS006Manage personal stressors in the work environmentcurrent
PUADEFVH001AConduct recovery vehicle operations in a field environmentnot current
PUADEFVH002AExtract disabled equipment using winching techniques in a field environmentnot current
RIICBS312DConduct bitumen tanker operationsnot current
TLIB0002Carry out vehicle inspectioncurrent
TLIC0001Operate chemical tankernot current
TLIC0002Operate fuel tankernot current
TLIC0003Operate LP gas tankercurrent
TLIC1051Operate commercial vehiclecurrent
TLIC2002Drive light rigid vehiclecurrent
TLIC3003Drive medium rigid vehiclecurrent
TLIC3004Drive heavy rigid vehiclecurrent
TLIC3005Drive heavy combination vehiclecurrent
TLIC4006Drive multi-combination vehiclecurrent
TLIC4068Operate heavy recovery ancillary equipmentnot current
TLIC4069Operate heavy recovery vehiclenot current
TLIC4070Tow a disabled heavy vehiclenot current
TLID4048Top load a dangerous goods tankernot current
TLID4049Bottom load a dangerous goods tankernot current
TLID4050Discharge a dangerous goods tankernot current
TLIE1005Carry out basic workplace calculationsnot current
TLIE3026Carry out advanced calculations in the transport and logistics industrycurrent
TLIE4025Prepare and process transport documentation for dangerous goodscurrent
TLIF0002Administer chain of responsibility policies and proceduresnot current
TLIF0005Apply a fatigue risk management systemcurrent
TLIF0006Administer a fatigue risk management systemcurrent
Show the remaining 18 elective units
CodeUnitIn this product
TLIF2018Operate firefighting equipmentcurrent
TLIF3091Apply awareness of dangerous goods and hazardous materials requirementscurrent
TLIF3096Carry out emergency response to a dangerous goods incidentcurrent
TLIF4007Implement and coordinate accident-emergency proceduresnot current
TLIF4065Ensure compliance with Australian Dangerous Goods Codecurrent
TLIH2001Interpret road maps and navigate pre-determined routesnot current
TLIH3002Plan and navigate routesnot current
TLIJ4010Implement quality systems and procedures in a dangerous goods workplacenot current
TLIL4010Assess and confirm customer transport requirementsnot current
TLIL4079Manage the recovery processnot current
TLILIC0001Licence to transport dangerous goods by roadcurrent
TLILIC0002Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC2014Licence to drive a light rigid vehiclecurrent
TLILIC2015Licence to drive a medium rigid vehiclecurrent
TLILIC2016Licence to drive a heavy rigid vehiclecurrent
TLILIC3017Licence to drive a heavy combination vehiclecurrent
TLILIC3018Licence to drive a multi-combination vehiclecurrent
TLIU1009Monitor plant and equipment in an environmentally sustainable mannercurrent

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Is TLI42116 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.