Can an RTO still enrol new students in CPC30311?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 17 January 2015. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPC30311?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC30311 Certificate III in Concreting

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC30311Superseded — not equivalentCertificate III in Concreting
not equivalent
CPC30313Superseded — equivalentCertificate III in Concreting
equivalent
CPC30318Superseded — equivalentCertificate III in Concreting
equivalent
CPC30320CurrentCertificate III in Concreting

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC30308CPC30311not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC30311CPC30313not equivalent16 January 2014
Replaces superseded non-equivalent CPC30311.

Official documents on the register

What training.gov.au lists for CPC30311 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPC30311_R2.pdfCPC30311 release 2 · product document · published 10 February 2013
CPC30311_R2.docxCPC30311 release 2 · product document · published 26 November 2024

Is CPC30311 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC30311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC30311 is made of

training.gov.au lists 37 units for CPC30311: 8 core and 0 elective, and 29 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Core units 8 listed

Code	Unit	In this product
CPCCCM1012A	Work effectively and sustainably in the construction industry	not current
CPCCCM1013A	Plan and organise work	not current
CPCCCM1014A	Conduct workplace communication	not current
CPCCCM1015A	Carry out measurements and calculations	not current
CPCCCM2001A	Read and interpret plans and specifications	not current
CPCCCM2006B	Apply basic levelling procedures	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	not current
RIICCM210A	Install trench support	not current

Units the register marks neither core nor elective 29 listed

Code	Unit	Core or elective	In this product
BSBSMB301A	Investigate micro business opportunities	`N/A`	not current
BSBSMB406A	Manage small business finances	`N/A`	not current
CPCCCA2003A	Erect and dismantle formwork for footings and slabs on ground	`N/A`	not current
CPCCCA3001A	Carry out general demolition of minor building structures	`N/A`	not current
CPCCCM2007B	Use explosive power tools	`N/A`	not current
CPCCCM2008B	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCO2011A	Handle concreting materials	`N/A`	not current
CPCCCO2012A	Use concreting tools and equipment	`N/A`	not current
CPCCCO3021A	Place concrete	`N/A`	not current
CPCCCO3022A	Finish concrete	`N/A`	not current
CPCCCO3023A	Cure concrete	`N/A`	not current
CPCCCO3024A	Carry out decorative finishes to concrete	`N/A`	not current
CPCCCO3025A	Resurface concrete	`N/A`	not current
CPCCCO3026A	Carry out repair and rectification of concrete	`N/A`	not current
CPCCCO3027A	Cut and core concrete	`N/A`	not current
CPCCCO3028A	Carry out tilt panel construction	`N/A`	not current
CPCCCO3029A	Apply and finish sprayed concrete	`N/A`	not current
CPCCCO3030A	Carry out high performance concreting	`N/A`	not current
CPCCCO3031A	Conduct off-form vertical concrete operations	`N/A`	not current
CPCCCO3032A	Conduct concrete boom delivery operations	`N/A`	not current
CPCCCO3033A	Slump test concrete	`N/A`	not current
CPCCCO3034A	Conduct concrete agitator truck operations	`N/A`	not current
CPCCLBM3001A	Licence to operate a concrete placing boom	`N/A`	not current
CPCCSF2003A	Cut and bend materials using oxy-LPG equipment	`N/A`	not current
CPCCSF2004A	Place and fix reinforcement materials	`N/A`	not current
CPCCSF3001A	Apply reinforcement schedule	`N/A`	not current
RIICFW301A	Construct underpinning	`N/A`	not current
RIIOHS302A	Implement traffic management plan	`N/A`	not current
RIIWMG203A	Drain and dewater civil construction site	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC30311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.