CPC20311 Certificate II in Steelfixing

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in CPC20311 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for CPC20311, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
5 February 2013
Latest release
Release 1 · 19 May 2011
Supersedes
CPC20308
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from CPC20311. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPC20308CPC20311not equivalent20 May 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPC20311 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • CPC20311_R1.pdfCPC20311 release 1 · product document · published 20 July 2012
  • CPC20311_R1.docxCPC20311 release 1 · product document · published 26 November 2024

Is CPC20311 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC20311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC20311 is made of

training.gov.au lists 15 units for CPC20311. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 15 listed

CodeUnitCore or electiveIn this product
CPCCCM1012AWork effectively and sustainably in the construction industryN/Anot current
CPCCCM1013APlan and organise workN/Anot current
CPCCCM1014AConduct workplace communicationN/Anot current
CPCCCM1015ACarry out measurements and calculationsN/Anot current
CPCCCM2001ARead and interpret plans and specificationsN/Anot current
CPCCCM2009ACarry out basic demolitionN/Anot current
CPCCCM2010AWork safely at heightsN/Anot current
CPCCCO2014ACarry out concrete workN/Anot current
CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industryN/Anot current
CPCCSF2001AHandle steelfixing materialsN/Anot current
CPCCSF2002AUse steelfixing tools and equipmentN/Anot current
CPCCSF2004APlace and fix reinforcement materialsN/Anot current
CPCPCM2033AWeld using arc welding equipmentN/Anot current
RIIOHS202AEnter and work in confined spacesN/Anot current
RIIWMG203ADrain and dewater civil construction siteN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with how the register lists CPC20311 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC20311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.