CPC30511 Certificate III in Dogging

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in CPC30511 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for CPC30511, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
14 February 2021
Latest release
Release 4 · 27 February 2020 · 4 releases in all
Supersedes
CPC30508
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from CPC30511. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPC30508CPC30511not equivalent20 May 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPC30511 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • CPC30511_R4.docxCPC30511 release 4 · product document · published 26 November 2024
  • CPC30511_R4.pdfCPC30511 release 4 · product document · published 27 February 2020

Is CPC30511 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC30511 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC30511 is made of

training.gov.au lists 22 units for CPC30511: 7 core and 4 elective, and 11 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 7 listed

CodeUnitIn this product
CPCCCM1012AWork effectively and sustainably in the construction industrynot current
CPCCCM1013APlan and organise worknot current
CPCCCM1014AConduct workplace communicationnot current
CPCCCM1015ACarry out measurements and calculationsnot current
CPCCCM2001ARead and interpret plans and specificationsnot current
CPCCCM3003AWork safely around power sources, services and assetsnot current
CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industrynot current

Elective units 4 listed

CodeUnitIn this product
BSBSMB301Investigate micro business opportunitiesnot current
BSBSMB406Manage small business financesnot current
RIIWHS302DImplement traffic management plannot current
TLILIC0003Licence to operate a forklift truckcurrent

Units the register marks neither core nor elective 11 listed

CodeUnitCore or electiveIn this product
CPCCCM2007BUse explosive power toolsN/Anot current
CPCCCM2008BErect and dismantle restricted height scaffoldingN/Anot current
CPCCCM2010BWork safely at heightsN/Anot current
CPCCCM3001COperate elevated work platformsN/Anot current
CPCCDO2011AHandle and use dogging tools and equipmentN/Anot current
CPCCDO3011APerform doggingN/Anot current
CPCCDO3012APerform crane schedulingN/Anot current
CPCCLDG3001ALicence to perform doggingN/Anot current
CPCCRI3001AOperate personnel and materials hoistsN/Anot current
CPCCSC2002AErect and dismantle basic scaffoldingN/Anot current
CPCCSF3001AApply reinforcement scheduleN/Anot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with how the register lists CPC30511 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC30511 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.