CPC10111 Certificate I in Construction

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPC10111 ended on 25 November 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
25 November 2020
Latest release
Release 3 · 9 December 2016 · 3 releases in all
Supersedes
CPC10108
Superseded by
CPC10120 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPC10111Superseded — equivalentCertificate I in Construction
  2. equivalent
  3. CPC10120Superseded — equivalentCertificate I in Construction
  4. equivalent
  5. CPC10126CurrentCertificate I in Construction

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPC10108CPC10111not equivalent20 May 2011

    The register records this supersession but attaches no note on what changed.

  • CPC10111CPC10120equivalent26 November 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPC10111 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • CPC10111_R3.docxCPC10111 release 3 · product document · published 26 November 2024
  • CPC10111_R3.pdfCPC10111 release 3 · product document · published 9 December 2016

Is CPC10111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC10111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC10111 is made of

training.gov.au lists 14 units for CPC10111: 8 core and 6 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 8 listed

CodeUnitIn this product
CPCCCM1012AWork effectively and sustainably in the construction industrynot current
CPCCCM1013APlan and organise worknot current
CPCCCM1014AConduct workplace communicationnot current
CPCCCM2001ARead and interpret plans and specificationsnot current
CPCCCM2005BUse construction tools and equipmentnot current
CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industrynot current
CPCCVE1011AUndertake a basic construction projectnot current
CPCCWHS1001Prepare to work safely in the construction industrynot current

Elective units 6 listed

CodeUnitIn this product
CPCCCM1011AUndertake basic estimation and costingnot current
CPCCCM1015ACarry out measurements and calculationsnot current
CPCCCM1016AIdentify requirements for safe tilt-up worknot current
CPCCCM2004AHandle construction materialsnot current
CPCCCM2006BApply basic levelling proceduresnot current
CPCCVE1002BUndertake a basic computer design projectnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC10111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.