Where the register points next
training.gov.au points at nothing after CPC31920: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is CPC31920 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC31920 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC31920 is made of
training.gov.au lists 46 units for CPC31920: 18 core and 28 elective. To complete it, the register publishes a rule of 18 core units plus 11 electives — 29 units in all.
Core units 18 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCA2002 | Use carpentry tools and equipment | ●current |
| CPCCCA2011 | Handle carpentry materials | ●current |
| CPCCCA3010 | Install windows and doors | ●current |
| CPCCCM2006 | Apply basic levelling procedures | ●current |
| CPCCCM2012 | Work safely at heights | ●current |
| CPCCCM3004 | Identify and apply information in construction plans, drawings and specifications | ●current |
| CPCCJN2003 | Package manufactured products for transport | ●current |
| CPCCJN3002 | Use computer-controlled machinery | ●current |
| CPCCJN3004 | Manufacture and assemble joinery components | ●current |
| CPCCJN3100 | Process materials to produce components using static machines | ●current |
| CPCCJS3002 | Manufacture stair components for straight flighted stairs | ●current |
| CPCCOM1012 | Work effectively and sustainably in the construction industry | ●current |
| CPCCOM1013 | Plan and organise work | ●current |
| CPCCOM1014 | Conduct workplace communication | ●current |
| CPCCOM1015 | Carry out measurements and calculations | ●current |
| CPCCOM2001 | Read and interpret plans and specifications | ●current |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements | ●current |
| MSFFM3011 | Measure and draw site layout for manufactured furniture products | !not current |
Elective units 28 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCA3001 | Carry out general demolition of minor building structures | ●current |
| CPCCCA3003 | Install flooring systems | ●current |
| CPCCCA3004 | Construct and erect wall frames | ●current |
| CPCCCA3006 | Erect roof trusses | ●current |
| CPCCCA3011 | Refurbish timber sashes to window frames | ●current |
| CPCCCA3012 | Frame and fit wet area fixtures | ●current |
| CPCCCA3014 | Construct and install bulkheads | ●current |
| CPCCCA3016 | Construct, assemble and install timber external stairs | ●current |
| CPCCCA3024 | Install lining, panelling and moulding | ●current |
| CPCCCA3026 | Assemble partitions | ●current |
| CPCCCM3005 | Calculate costs of construction work | ●current |
| CPCCJN2001 | Assemble components | ●current |
| CPCCJN3003 | Manufacture components for doors, windows and frames | ●current |
| CPCCJN3005 | Cut and install glass | ●current |
| CPCCJS3003 | Assemble and install stairs | ●current |
| CPCCJS3004 | Manufacture and install continuous handrailing and special stair components | ●current |
| CPCCJS3005 | Manufacture stair components for curved and geometric stairs | ●current |
| CPCCJS3006 | Construct, assemble and install composite external stairs | ●current |
| CPCCJS3011 | Design and set out stairs | ●current |
| CPCCPD3021 | Prepare existing coated surface for painting | ●current |
| CPCCSH2003 | Apply and install sealant and sealant devices | ●current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| CPCSHP3001 | Fabricate shopfitting components using CNC machines | ●current |
| CPCSHP3005 | Apply and trim decorative additions to shopfittings and components | ●current |
| CPCSHP3006 | Prepare shopfittings and surfaces and apply liquid finishes | ●current |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies | ●current |
| MSFFM3009 | Produce manual and computer-aided production drawings | !not current |
| MSFFM3020 | Fabricate synthetic solid surface products | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day CPC31920 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.