When must new enrolments into MEM30705 stop?

New enrolments are not permitted from 26 June 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM30705?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM30705 Certificate III in Marine Craft Construction

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM30705Superseded — equivalentCertificate III in Marine Craft Construction
equivalent
MEM30719CurrentCertificate III in Marine Craft Construction

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM30705MEM30719equivalent25 June 2019
The register records this supersession but attaches no note on what changed.

Is MEM30705 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM30705 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM30705 is made of

training.gov.au lists 44 units for MEM30705. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 44 listed

Code	Unit	Core or elective	In this product
MEM04018B	Perform general woodworking machine operations	`N/A`	not current
MEM07001B	Perform operational maintenance of machines/equipment	`N/A`	not current
MEM07024B	Operate and monitor machine/process	`N/A`	not current
MEM08002C	Pre-treat work for subsequent surface coating	`N/A`	not current
MEM08011B	Prepare surfaces using solvents and/or mechanical means	`N/A`	not current
MEM08014B	Apply protective coatings (basic)	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM09021B	Interpret and produce curved 3-dimensional shapes	`N/A`	not current
MEM12007D	Mark off/out structural fabrications and shapes	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13004B	Work safely with molten metals/glass	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM14005A	Plan a complete activity	`N/A`	not current
MEM15002A	Apply quality systems	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM17003A	Assist in the provision of on the job training	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM25001B	Apply fibre-reinforced materials	`N/A`	not current
MEM25002B	Form and integrate fibre-reinforced structures	`N/A`	not current
MEM25003B	Set up marine vessel structures	`N/A`	not current
MEM25004B	Fair and shape surfaces	`N/A`	not current
MEM25005B	Construct and assemble marine vessel timber components	`N/A`	not current
MEM25006B	Undertake marine sheathing operations	`N/A`	not current

Show the remaining 14 units

Code	Unit	Core or elective	In this product
MEM25007B	Maintain marine vessel surfaces	`N/A`	not current
MEM25008B	Repair marine vessel surfaces and structures	`N/A`	not current
MEM25009B	Form timber shapes using hot processes	`N/A`	not current
MEM25010B	Perform fitout procedures	`N/A`	not current
MEM25011B	Install marine systems	`N/A`	not current
MEM25012B	Install and test operations of marine auxiliary systems	`N/A`	not current
MEM25013B	Produce three-dimensional plugs/moulds	`N/A`	not current
MEM25014B	Perform marine slipping operations	`N/A`	not current
MEM25015A	Assemble and install equipment and accessories/ancillaries	`N/A`	not current
MEM50002B	Work safely on marine craft	`N/A`	not current
MEM50003B	Follow work procedures to maintain the marine environment	`N/A`	not current
MEM50004B	Maintain quality of environment by following marina codes	`N/A`	not current
MEM50009B	Safely operate a mechanically powered recreational boat	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM30705 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.