Can an RTO still enrol new students in MEM30905?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 26 June 2020. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in MEM30905?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM30905 Certificate III in Boating Services

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM30905Superseded — equivalentCertificate III in Boating Services
equivalent
MEM30919CurrentCertificate III in Boating Services

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM30905MEM30919equivalent25 June 2019
Supersedes and is equivalent to MEM30905 Certificate III in Boating Services

Official documents on the register

What training.gov.au lists for MEM30905 and for its training package MEM05 (release 11.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

MEM30905_R3.docxMEM30905 release 3 · product document · published 1 January 1901
MEM30905_R3.pdfMEM30905 release 3 · product document · published 21 December 2012

Is MEM30905 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM30905 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM30905 is made of

training.gov.au lists 36 units for MEM30905. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 36 listed

Code	Unit	Core or elective	In this product
MEM04018B	Perform general woodworking machine operations	`N/A`	not current
MEM05003B	Perform soft soldering	`N/A`	not current
MEM05005B	Carry out mechanical cutting	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM11010B	Operate mobile load shifting equipment	`N/A`	not current
MEM11011B	Undertake manual handling	`N/A`	not current
MEM12006C	Mark off/out (general engineering)	`N/A`	not current
MEM12007D	Mark off/out structural fabrications and shapes	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM25001B	Apply fibre-reinforced materials	`N/A`	not current
MEM25004B	Fair and shape surfaces	`N/A`	not current
MEM25007B	Maintain marine vessel surfaces	`N/A`	not current
MEM50001B	Classify recreational boating technologies and features	`N/A`	not current
MEM50002B	Work safely on marine craft	`N/A`	not current
MEM50003B	Follow work procedures to maintain the marine environment	`N/A`	not current
MEM50004B	Maintain quality of environment by following marina codes	`N/A`	not current
MEM50005B	Refuel vessels	`N/A`	not current
MEM50006B	Check operational capability of marine craft	`N/A`	not current
MEM50007B	Check operational capability of sails and sail operating equipment	`N/A`	not current

Show the remaining 6 units

Code	Unit	Core or elective	In this product
MEM50008B	Carry out trip preparation and planning	`N/A`	not current
MEM50009B	Safely operate a mechanically powered recreational boat	`N/A`	not current
MEM50010B	Respond to boating emergencies and incidents	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
TLILIC0012A	Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)	`N/A`	not current
TLILIC2001A	Licence to operate a forklift truck	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MEM30905 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.