When must new enrolments into MEM30405 stop?

New enrolments are not permitted from 19 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM30405?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM30405 Certificate III in Engineering - Electrical/Electronic Trade

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM30405Superseded — not equivalentCertificate III in Engineering - Electrical/Electronic Trade
not equivalent
MEM30422CurrentCertificate III in Engineering - Electronic Trade

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM30405MEM30422not equivalent18 December 2022
The register records this supersession but attaches no note on what changed.

Is MEM30405 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM30405 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM30405 is made of

training.gov.au lists 44 units for MEM30405. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 44 listed

Code	Unit	Core or elective	In this product
MEM05001B	Perform manual soldering/desoldering - electrical/electronic components	`N/A`	not current
MEM05002B	Perform high reliability soldering and desoldering	`N/A`	not current
MEM05003B	Perform soft soldering	`N/A`	not current
MEM05006C	Perform brazing and or silver soldering	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM10002B	Terminate and connect electrical wiring	`N/A`	not current
MEM10003B	Install and test electrical wiring and circuits up to 1000 volts a.c. and 1500 volts d.c.	`N/A`	not current
MEM10004B	Enter and change programmable controller operational parameters	`N/A`	not current
MEM10011B	Terminate and connect specialist cables	`N/A`	not current
MEM12002B	Perform electrical/electronic measurement	`N/A`	not current
MEM12004B	Perform precision electrical/electronic measurement	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM14005A	Plan a complete activity	`N/A`	not current
MEM15002A	Apply quality systems	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM17003A	Assist in the provision of on the job training	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM18045B	Fault find/repair electrical equipment/components up to 250 volts single phase supply	`N/A`	not current
MEM18046B	Fault find/repair electrical equipment/components up to 1000 volts a.c./1500 volts d.c.	`N/A`	not current
MEM18047B	Diagnose and maintain electronic controlling systems on mobile plant	`N/A`	not current
MEM18048B	Fault find and repair/rectify basic electrical circuits	`N/A`	not current
MEM18049C	Disconnect/reconnect fixed wired equipment up to 1000 volts a.c./1500 volts d.c.	`N/A`	not current
MEM18050C	Disconnect/reconnect fixed wired equipment over 1000 volts a.c./1500 volts d.c.	`N/A`	not current

Show the remaining 14 units

Code	Unit	Core or elective	In this product
MEM18051B	Fault find and repair/rectify complex electrical circuits	`N/A`	not current
MEM18052B	Maintain fluid power systems for mobile plant	`N/A`	not current
MEM18054B	Fault find, test and calibrate instrumentation systems and equipment	`N/A`	not current
MEM18055B	Dismantle, replace and assemble engineering components	`N/A`	not current
MEM18056B	Diagnose and repair analog equipment and components	`N/A`	not current
MEM18057B	Maintain/service analog/digital electronic equipment	`N/A`	not current
MEM18058C	Modify electronic equipment	`N/A`	not current
MEM18060B	Maintain, repair control instrumentation - single and multiple loop control systems	`N/A`	not current
MEM18062B	Install, maintain and calibrate instrumentation sensors, transmitters and final control elements	`N/A`	not current
MEM18063B	Terminate signal and data cables	`N/A`	not current
MEM18064B	Maintain instrumentation system components	`N/A`	not current
MEM18065B	Diagnose and repair digital equipment and components	`N/A`	not current
MEM18098A	Prepare to perform work associated with fuel system installation and servicing	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM30405 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.