When must new enrolments into MEM30605 stop?

New enrolments are not permitted from 26 June 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM30605?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM30605 Certificate III in Jewellery Manufacture

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM30605Superseded — equivalentCertificate III in Jewellery Manufacture
equivalent
MEM30619CurrentCertificate III in Jewellery Manufacture

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM30605MEM30619equivalent25 June 2019
The register records this supersession but attaches no note on what changed.

Is MEM30605 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM30605 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM30605 is made of

training.gov.au lists 56 units for MEM30605. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 56 listed

Code	Unit	Core or elective	In this product
MEM03001B	Perform manual production assembly	`N/A`	not current
MEM03002B	Perform precision assembly	`N/A`	not current
MEM03006B	Set assembly stations	`N/A`	not current
MEM05006C	Perform brazing and or silver soldering	`N/A`	not current
MEM06007B	Perform basic incidental heat/quenching, tempering and annealing	`N/A`	not current
MEM07001B	Perform operational maintenance of machines/equipment	`N/A`	not current
MEM07005C	Perform general machining	`N/A`	not current
MEM07024B	Operate and monitor machine/process	`N/A`	not current
MEM07032B	Use workshop machines for basic operations	`N/A`	not current
MEM07040A	Set multistage integrated processes	`N/A`	not current
MEM08001B	Perform wire, jig and barrel load/unload work	`N/A`	not current
MEM08002C	Pre-treat work for subsequent surface coating	`N/A`	not current
MEM08003C	Perform electroplating operations	`N/A`	not current
MEM08010B	Manually finish/polish materials	`N/A`	not current
MEM08011B	Prepare surfaces using solvents and/or mechanical means	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13002B	Undertake occupational health and safety activities in the workplace	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13004B	Work safely with molten metals/glass	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM14005A	Plan a complete activity	`N/A`	not current
MEM15002A	Apply quality systems	`N/A`	not current
MEM15004B	Perform inspection	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current

Show the remaining 26 units

Code	Unit	Core or elective	In this product
MEM17003A	Assist in the provision of on the job training	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM18003C	Use tools for precision work	`N/A`	not current
MEM19001B	Perform jewellery metal casting	`N/A`	not current
MEM19002B	Prepare jewellery illustrations	`N/A`	not current
MEM19003B	Handle gem materials	`N/A`	not current
MEM19004B	Handle and examine gemstone materials	`N/A`	not current
MEM19005B	Produce three-dimensional precision items	`N/A`	not current
MEM19006B	Replace watch batteries	`N/A`	not current
MEM19007B	Perform gemstone setting	`N/A`	not current
MEM19008B	Prepare jewellery designs	`N/A`	not current
MEM19009B	Perform investment procedures for lost wax casting process	`N/A`	not current
MEM19010B	Produce rubber moulds for lost wax casting process	`N/A`	not current
MEM19011B	Perform wax injection of moulds for lost wax casting process	`N/A`	not current
MEM19012B	Produce jewellery wax model	`N/A`	not current
MEM19013B	Produce jewellery metal masters	`N/A`	not current
MEM19014B	Perform hand engraving	`N/A`	not current
MEM19015B	Perform jewellery enamelling	`N/A`	not current
MEM19016B	Construct jewellery components	`N/A`	not current
MEM19017B	Fabricate jewellery items	`N/A`	not current
MEM19018B	Repair jewellery items	`N/A`	not current
MEM19020B	Fault-find and maintain micro-mechanisms	`N/A`	not current
MEM19021B	Diagnose and service micro-mechanisms	`N/A`	not current
MEM19022B	Perform precision micro-mechanism diagnosis and servicing	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM30605 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.