When must new enrolments into MEM10105 stop?

New enrolments are not permitted from 26 June 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM10105?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM10105 Certificate I in Engineering

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM10105Superseded — not equivalentCertificate I in Engineering
not equivalent
MEM10119CurrentCertificate I in Engineering

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM10105MEM10119not equivalent25 June 2019
The register records this supersession but attaches no note on what changed.

Is MEM10105 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM10105 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM10105 is made of

training.gov.au lists 92 units for MEM10105. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 92 listed

Code	Unit	Core or elective	In this product
MEM03001B	Perform manual production assembly	`N/A`	not current
MEM03002B	Perform precision assembly	`N/A`	not current
MEM03003B	Perform sheet and plate assembly	`N/A`	not current
MEM03004B	Perform electronic/electrical assembly (production)	`N/A`	not current
MEM03006B	Set assembly stations	`N/A`	not current
MEM04004B	Prepare and mix sand for metal moulding	`N/A`	not current
MEM04008B	Fettle and trim metal castings/forgings	`N/A`	not current
MEM04018B	Perform general woodworking machine operations	`N/A`	not current
MEM05001B	Perform manual soldering/desoldering - electrical/electronic components	`N/A`	not current
MEM05003B	Perform soft soldering	`N/A`	not current
MEM05004C	Perform routine oxy acetylene welding	`N/A`	not current
MEM05005B	Carry out mechanical cutting	`N/A`	not current
MEM05006C	Perform brazing and or silver soldering	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM05013C	Perform manual production welding	`N/A`	not current
MEM06001B	Perform hand forging	`N/A`	not current
MEM06007B	Perform basic incidental heat/quenching, tempering and annealing	`N/A`	not current
MEM07001B	Perform operational maintenance of machines/equipment	`N/A`	not current
MEM07003B	Perform machine setting (routine)	`N/A`	not current
MEM07024B	Operate and monitor machine/process	`N/A`	not current
MEM07028B	Operate computer controlled machines/processes	`N/A`	not current
MEM07029B	Perform routine sharpening/maintenance of production tools and cutters	`N/A`	not current
MEM07030C	Perform metal spinning lathe operations (basic)	`N/A`	not current
MEM07032B	Use workshop machines for basic operations	`N/A`	not current
MEM08001B	Perform wire, jig and barrel load/unload work	`N/A`	not current
MEM08002C	Pre-treat work for subsequent surface coating	`N/A`	not current
MEM08004B	Finish work using wet, dry and vapour deposition methods	`N/A`	not current
MEM08009C	Make up solutions	`N/A`	not current
MEM08010B	Manually finish/polish materials	`N/A`	not current

Show the remaining 62 units

Code	Unit	Core or elective	In this product
MEM08011B	Prepare surfaces using solvents and/or mechanical means	`N/A`	not current
MEM08012B	Prepare surfaces by abrasive blasting (basic)	`N/A`	not current
MEM08014B	Apply protective coatings (basic)	`N/A`	not current
MEM08016B	Control blast coating by-products, materials and emissions	`N/A`	not current
MEM11005B	Pick and process order	`N/A`	not current
MEM11006B	Perform production packaging	`N/A`	not current
MEM11007B	Administer inventory procedures	`N/A`	not current
MEM11008B	Package materials (stores and warehouse)	`N/A`	not current
MEM11009B	Handle/move bulk fluids/gases	`N/A`	not current
MEM11011B	Undertake manual handling	`N/A`	not current
MEM11013B	Undertake warehouse receival process	`N/A`	not current
MEM11016B	Order materials	`N/A`	not current
MEM12001B	Use comparison and basic measuring devices	`N/A`	not current
MEM12002B	Perform electrical/electronic measurement	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13001B	Perform emergency first aid	`N/A`	not current
MEM13002B	Undertake occupational health and safety activities in the workplace	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13004B	Work safely with molten metals/glass	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM14005A	Plan a complete activity	`N/A`	not current
MEM15001B	Perform basic statistical quality control	`N/A`	not current
MEM15002A	Apply quality systems	`N/A`	not current
MEM15003B	Use improvement processes in team activities	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM16004B	Perform internal/external customer service	`N/A`	not current
MEM16005A	Operate as a team member to conduct manufacturing, engineering or related activities	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM17003A	Assist in the provision of on the job training	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM18013B	Perform gland packing	`N/A`	not current
MEM18038B	Maintain wheels and tyres	`N/A`	not current
MEM19001B	Perform jewellery metal casting	`N/A`	not current
MEM19002B	Prepare jewellery illustrations	`N/A`	not current
MEM19003B	Handle gem materials	`N/A`	not current
MEM19006B	Replace watch batteries	`N/A`	not current
MEM19009B	Perform investment procedures for lost wax casting process	`N/A`	not current
MEM19010B	Produce rubber moulds for lost wax casting process	`N/A`	not current
MEM19011B	Perform wax injection of moulds for lost wax casting process	`N/A`	not current
MEM19014B	Perform hand engraving	`N/A`	not current
MEM19015B	Perform jewellery enamelling	`N/A`	not current
MEM19016B	Construct jewellery components	`N/A`	not current
MEM19017B	Fabricate jewellery items	`N/A`	not current
MEM20001A	Produce keys	`N/A`	not current
MEM20002A	Assemble and test lock mechanisms	`N/A`	not current
MEM20003A	Install and upgrade locks and hardware	`N/A`	not current
MEM25001B	Apply fibre-reinforced materials	`N/A`	not current
MEM25002B	Form and integrate fibre-reinforced structures	`N/A`	not current
MEM25004B	Fair and shape surfaces	`N/A`	not current
MEM25006B	Undertake marine sheathing operations	`N/A`	not current
MEM25007B	Maintain marine vessel surfaces	`N/A`	not current
MEM25014B	Perform marine slipping operations	`N/A`	not current
MEM50002B	Work safely on marine craft	`N/A`	not current
MEM50003B	Follow work procedures to maintain the marine environment	`N/A`	not current
MEM50004B	Maintain quality of environment by following marina codes	`N/A`	not current
MEM50009B	Safely operate a mechanically powered recreational boat	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM10105 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.