Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for MSM31015 and for its training package MSM (release 9.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is MSM31015 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MSM31015 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MSM31015 is made of
training.gov.au lists 67 units for MSM31015: 3 core and 64 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 3 listed
Elective units 64 listed
| Code | Unit | In this product |
|---|---|---|
| AUMGTT001 | Apply trim to vehicle components | ●current |
| AURETB001 | Diagnose and repair electric braking systems | !not current |
| AURETR012 | Test and repair basic electrical circuits | !not current |
| AURETR015 | Inspect, test and service batteries | !not current |
| AURTTA017 | Carry out vehicle safety inspections | ●current |
| AURTTB001 | Inspect and service braking systems | !not current |
| AURTTD004 | Inspect and service suspension systems | ●current |
| AURTTJ012 | Remove, inspect and refit wheel hubs and associated brake components | ●current |
| AURTTY001 | Repair vehicle chassis, frame and associated components | ●current |
| AURVTG011 | Install side vehicle windows | ●current |
| AURVTS004 | Repair vehicle composite material components | !not current |
| AURVTT015 | Fabricate and install canvas products for automotive and marine components | ●current |
| AURVTT019 | Fabricate and install automotive and marine frames, canopies and side curtains | !not current |
| CPCPCM2043A | Carry out WHS requirements | !not current |
| CPCPGS3046A | Install LPG systems in caravans, mobile homes and mobile workplaces | !not current |
| MEM05005B | Carry out mechanical cutting | !not current |
| MEM05012C | Perform routine manual metal arc welding | !not current |
| MEM05050B | Perform routine gas metal arc welding | !not current |
| MEM09002B | Interpret technical drawing | !not current |
| MEM10002B | Terminate and connect electrical wiring | !not current |
| MEM11010B | Operate mobile load shifting equipment | !not current |
| MEM11011B | Undertake manual handling | !not current |
| MEM12002B | Perform electrical/electronic measurement | !not current |
| MEM12023A | Perform engineering measurements | !not current |
| MEM14004A | Plan to undertake a routine task | !not current |
| MEM15024A | Apply quality procedures | !not current |
| MEM18001C | Use hand tools | !not current |
| MEM18002B | Use power tools/hand held operations | !not current |
| MEM18038B | Maintain wheels and tyres | !not current |
| MEM18045B | Fault find/repair electrical equipment/components up to 250 volts single phase supply | !not current |
Show the remaining 34 elective units
| Code | Unit | In this product |
|---|---|---|
| MSMOPS101 | Make measurements | ●current |
| MSMOPS212 | Use organisation computers or data systems | ●current |
| MSMPER200 | Work in accordance with an issued permit | ●current |
| MSMRV350 | Remove and replace a recreational vehicle roof | !not current |
| MSMRV352 | Remove and replace a recreational vehicle sidewall cladding | !not current |
| MSMRV356 | Remove and replace gas struts and roof lifting equipment on a recreational vehicle | !not current |
| MSMRV357 | Remove and replace external components of a recreational vehicle | !not current |
| MSMRV358 | Modify the body of a recreational vehicle | !not current |
| MSMRV359 | Install additional appliances in a recreational vehicle | !not current |
| MSMRV360 | Service camper wind up systems | !not current |
| MSMRV361 | Repair dry rot in a recreational vehicle | !not current |
| MSMRV362 | Install and repair battery systems in a recreational vehicle | !not current |
| MSMRV363 | Complete pre-delivery check of a recreational vehicle | !not current |
| MSMRV364 | Hand over a recreational vehicle to a customer | !not current |
| MSMRV365 | Remove and refit body moulding | !not current |
| MSMRV366 | Fit transfers and decals to a recreational vehicle | !not current |
| MSMRV367 | Fabricate frame structures | ●current |
| MSMRV368 | Install frame structures | ●current |
| MSMRVG201 | Tow a recreational vehicle safely | !not current |
| MSMRVS202 | Repair/service LPG systems in a recreational vehicle | !not current |
| MSMRVT201 | Apply technical knowledge of recreational vehicle manufacturing to work activities | !not current |
| MSMSUP100 | Apply workplace context to own job | ●current |
| MSMSUP101 | Clean workplace or equipment | ●current |
| MSMSUP106 | Work in a team | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMSUP280 | Manage conflict at work | ●current |
| MSMSUP291 | Participate in continuous improvement | ●current |
| MSMWHS110 | Follow emergency response procedures | ●current |
| MSMWHS205 | Control minor incidents | ●current |
| MSS402040 | Apply 5S procedures | !not current |
| MSS402080 | Undertake root cause analysis | !not current |
| PMBHAN103 | Shift materials safely by hand | !not current |
| SIRXPDK001 | Advise on products and services | ●current |
| TLID2010 | Operate a forklift | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MSM training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is MSM31015 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.